Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: setboy on November 21, 2004, 03:29:45 PM
-
ok i got some Questions about attenuaters
here is my rig at933s-batbox-AD-20-jb3 1 where in the mix do/can the attenuaters go?
2 do i need 1 or 2 attenuaters (yes it is a dumb question)
3 will this attenuaters work http://www.shure.com/accessories/a15as.asp?PN=Problem%20Solvers
Thanks
Raphael
-
I think you will need them before the AD-20 device...that's the input that you are trying to pad...one for each channel...
From other threads I've read---The AD-20 seems prone to overload...no direct experience with the device..
-
1 where in the mix do/can the attenuaters go?
Between your mics/batbox and AD-20.
2 do i need 1 or 2 attenuaters (yes it is a dumb question)
Two. One for each channel, left and right.
3 will this attenuaters work http://www.shure.com/accessories/a15as.asp?PN=Problem%20Solvers
Yes. Though you'll need the appropriate adapters to feed the A15AS from your batter box, and then maybe to feed your AD-20 as well (forget what connectors the AD-20 has)
Are you sure you need attenuators?
-
Are you sure you need attenuators?
no im not
i was going to get all my other stuff and test is out and see how it gos befor i get them (if i need them that is) i just wanted to look into it some
Thanks for the help
Raphael
-
Raphael, I have one of the A15AS thangs I'd be willing to sell you cheap..
Drop me a PM if you haven't boughten a pair yet,
Nick
-
Raphael, I have one of the A15AS thangs I'd be willing to sell you cheap..
Drop me a PM if you haven't boughten a pair yet,
Nick
pm sent
-
Though you'll need the appropriate adapters to feed the A15AS from your batter box, and then maybe to feed your AD-20 as well (forget what connectors the AD-20 has)
do you (or any one else) know where i can get that
i have been looking on the net but cant find any thing
Raphael