Become a Site Supporter and Never see Ads again!

Author Topic: 744/722 "Media too slow" Message  (Read 65408 times)

0 Members and 1 Guest are viewing this topic.

Offline reesey

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 261
  • Gender: Male
    • Artist Type
Re: 744/722 "Media too slow" Message
« Reply #90 on: April 25, 2005, 05:50:13 PM »
i have been taping for 18 years and digitally taping for 14, and i have seldomnly if ever had a problem with equipment or transfers.  flowing effortlessly from one format to the next, buying and selling shit WAY too often, and still no issues.  seems to me all these problems are just the jynx on people that arent meant to tape.  you should take up hopscotch or something that doesnt have so many wires and buttons, and give me more room FOB side.  i'll run tomato cans (DIN or NOS) on strings and have a flawless recording.  damn pussies.  ;D

so did anyone actually pull a FOB of WSP @ DAR?  is there a BT in the future?  not that i want it  :P but my brother-in-law is jonsing.

<this is a lighthearted post and no harm is meant - i love you all and just thought lighheartedness may be in order>
mk4>kc5>cmc6xt>sx-m2>mt2496
d{^_^}b
       \~

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: 744/722 "Media too slow" Message
« Reply #91 on: April 25, 2005, 06:09:46 PM »
so did anyone actually pull a FOB of WSP @ DAR?  is there a BT in the future?  not that i want it  :P but my brother-in-law is jonsing.

<this is a lighthearted post and no harm is meant - i love you all and just thought lighheartedness may be in order>

:-)

There were hardly any tapers at DAR anyway.  There were maybe 5 rigs in the section and I didn't see anyone else down front except for me and Joe.  I looked too.  If there was someone, they were running from the hat or keeping it really low.

I have chunks of the show but I seem to be missing enough that patching it would just be a travesty.  I could BT what I have if it's of interest.  I'm going to try to get it tracked in the next couple of days. 

The first rule of amateur neurosurgery club is .... I forget.

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3411
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
Re: 744/722 "Media too slow" Message
« Reply #92 on: April 25, 2005, 07:34:05 PM »
I didn't even think that you taped, Scott?

edit:
SD claims that the media too slow error was a firmware 1.24 issue and is now fixed in v1.32.  We'll see how it goes this weekend.
« Last Edit: April 25, 2005, 10:22:59 PM by wboswell »

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re: 744/722 "Media too slow" Message
« Reply #93 on: April 26, 2005, 08:38:48 AM »
as is the sbm1 getting to hot and shutting down,

nick,
where was the sbm when this happened? stealthing or open taping? how long did it take?

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re: 744/722 "Media too slow" Message
« Reply #94 on: April 26, 2005, 08:44:37 AM »
as is the sbm1 getting to hot and shutting down,

nick,
where was the sbm when this happened? stealthing or open taping? how long did it take?

stealthing....ran it for a show a couple of years ago with 2 openers and a headliner....4 hours of music on a july night....got hot and shut down at the end of the goo goo dolls set....batts still had juice, so I assumed it was a heat problem...did not have a problem after that though...

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re: 744/722 "Media too slow" Message
« Reply #95 on: April 26, 2005, 08:47:47 AM »
as is the sbm1 getting to hot and shutting down,

nick,
where was the sbm when this happened? stealthing or open taping? how long did it take?

stealthing....ran it for a show a couple of years ago with 2 openers and a headliner....4 hours of music on a july night....got hot and shut down at the end of the goo goo dolls set....batts still had juice, so I assumed it was a heat problem...did not have a problem after that though...

got it. thanks!

marc0789

  • Guest
  • Trade Count: (0)
Re: 744/722 "Media too slow" Message
« Reply #96 on: April 26, 2005, 12:15:47 PM »
 ???

trying to recall, but don't think I've ever gotten a "media too slow" message on any dat recorder I've owned. :P

marc0789

  • Guest
  • Trade Count: (0)
Re: 744/722 "Media too slow" Message
« Reply #97 on: April 26, 2005, 12:23:04 PM »
I spent 5min trying to figure out why my ad1000 wouldn't lock Thurs night of Radio City.  I played w/ the input and sample rate selectors for a while, then Finally realized it wasn't ever going to lock w/ the sync source set to aes.  Felt really smart.  Luckily it was all before they came on.


mitch

been there, done that. with 2 minutes to spare. ;D

Offline twoodruff

  • Trade Count: (91)
  • Needs to get out more...
  • *****
  • Posts: 4687
  • Gender: Male
Re: 744/722 "Media too slow" Message
« Reply #98 on: April 26, 2005, 12:54:41 PM »
???

trying to recall, but don't think I've ever gotten a "media too slow" message on any dat recorder I've owned. :P


and you've owned them all
No Mics
Clamps
Cables
No Preamp
Recorders

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: 744/722 "Media too slow" Message
« Reply #99 on: April 26, 2005, 08:07:32 PM »
???

trying to recall, but don't think I've ever gotten a "media too slow" message on any dat recorder I've owned. :P


and you've owned them all

yes he has ;D
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

marc0789

  • Guest
  • Trade Count: (0)
Re: 744/722 "Media too slow" Message
« Reply #100 on: April 27, 2005, 12:12:45 PM »
...not the famous Fisher machine, the sv-255. the 722 appears to be Nate Fisher Ready. ;D

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8676
  • Gender: Male
Re: 744/722 "Media too slow" Message
« Reply #101 on: April 29, 2005, 02:15:06 AM »
i seem to have a glitch in my dylan recording from tonight.  when it split at the 2gb mark during the last tune, it's not clean at all.  i have an SDINFO.TXT file in the SOUNDDEV dir.  does that mean i had an error?

this sucks.  never had a problem before with the older (pre 1.32) firmware

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8676
  • Gender: Male
Re: 744/722 "Media too slow" Message
« Reply #102 on: April 29, 2005, 02:31:06 AM »
it's actually on both 2GB marks.  both were unclean cuts

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re: 744/722 "Media too slow" Message
« Reply #103 on: April 29, 2005, 07:31:25 AM »
it's actually on both 2GB marks. both were unclean cuts

odd, I have not had any or heard of glitches happening at the cuts

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4634
  • Gender: Male
Re: 744/722 "Media too slow" Message
« Reply #104 on: April 29, 2005, 08:53:41 AM »
If you haven't already, post that on the Sound Devices Support forum.
Out of the game … for now?

 

RSS | Mobile
Page created in 0.149 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF