Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: MakersMarc on September 11, 2019, 01:01:37 PM
-
thanks!
-
You can use input delay to compensate for differences in the timing of each channel when recording.
* This setting is not available when the sample rate is 192 kHz.
Source: https://static.roland.com/assets/media/pdf/r88_add_added_features_v11_e01_W.pdf
-
At the channel inputs only, set prior to recording. Cannot delay channels relative to each other once recorded
Just posted in the other thread- https://taperssection.com/index.php?topic=191851.msg2310673#msg2310673