Become a Site Supporter and Never see Ads again!

Author Topic: Just sharing a lightweight rig  (Read 529 times)

0 Members and 1 Guest are viewing this topic.

Offline philipus

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 9
Just sharing a lightweight rig
« on: May 16, 2025, 03:51:00 AM »
Hello I hope it's ok to share a little rig I've been toying with lately. The goal has been to find a lightweight and inexpensive solution mainly for simple soundscapes when I'm travelling. The mics are the Immersive Soundscape's Thumb omnis which seem really well built around Neutrik connectors. I have two recorders, a trusty R-26 and a MixPre 6 II which I recently got.

Clamps These are from Stagg (4,50 Eur) — https://www.amazon.nl/-/en/dp/B000OR83F8
They are slightly on the larger side but rather sturdy and hold the mics fairly well. I will however add some padding inside to make them close around the mics better. Out of the box they won't allow dipping horizontally like on the photos but the plastic is not too tough and can easily be cut to make the arm swing lower. They have 3/8 holes so need an adapter ring to fit on the bar. Being a photographer I tend to have such stuff in droves, but a good pack to get is this one with various connectors and adapters — https://www.amazon.nl/dp/B075SDWDHD

Cables These are 1,8m Cable Matters (17 Eur for a pair) — https://www.amazon.nl/-/en/dp/B00KO8VYMG
They have metal connectors and are relatively lightweight and very well-built.
 
Bar This is by Utebit (10 Eur) — https://www.amazon.nl/-/en/dp/B08NSX1R5Z
This is actually a photography flash bracket, but I like that it is extremely light and has four proper and easily adjustable tripod screws plus both a standard 1/4 inch tripod screw and a larger 3/8 inch screw. It's 30cm long.

Tripod This is my old carbon fiber Rollei C5i (around 130 Eur) — https://www.rollei.de/products/carbon-stativ-c5i
This is my main travel tripod which has been with me everywhere. I like that it functions as a proper full-height tripod and can hold fairly heavy cameras (think medium format camera with large wide angle) yet still fits into a carry-on and only weighs 1,2kg.

Not on the picture are these magnets — https://www.amazon.nl/-/en/dp/B0CYZM164V
They have a 1/8 inch tripod screws to which the Staggs can be fitted (15 Eur for a pack of 4 with various accessories).

cheers
Philip
« Last Edit: May 16, 2025, 02:56:00 PM by philipus »
R-26 • MP 6 II
May the wings of liberty never lose a feather

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8831
  • Gender: Male
    • RockSuitcase: stage photography
Re: Just sharing a lightweight rig
« Reply #1 on: May 16, 2025, 02:46:39 PM »
Nice looking rig. Those mics are not known to me, but they seem to be very good for what we do.
Thanks for posting. +T
« Last Edit: May 18, 2025, 04:00:55 PM by rocksuitcase »
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline goodcooker

  • Trade Count: (46)
  • Needs to get out more...
  • *****
  • Posts: 5016
  • Gender: Male
  • goes to 11
Re: Just sharing a lightweight rig
« Reply #2 on: May 16, 2025, 09:32:39 PM »

That's a nice looking setup and is very portable. I really like that carbon fiber tripod and Tbar setup. Very nice.
http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline taperdave1998

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • Gender: Male
Re: Just sharing a lightweight rig
« Reply #3 on: May 18, 2025, 01:58:20 AM »
Looks like something that would be extremely handy to take backpacking out into the woods for nature grabs.
1 Corinthians 10:31

Mics: Rode M5 | sE Electronics sE8 (cardioid capsules)
Cables: Mogami Gold Stage 20' XLR
Mounting: Rode Stereo Bar | Rycote INV-7 (rarely used)
Stands: On-Stage MS7701B | König & Meyer 20800
Recorders: Zoom H1 XLR, H1essential, H4n Pro (retired)

Offline philipus

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 9
Re: Just sharing a lightweight rig
« Reply #4 on: May 19, 2025, 01:50:25 PM »
Thank you so much for your replies :) I will be trying it out as soon as I have found good windscreens for the Thumbs.

Cheers
Philip
R-26 • MP 6 II
May the wings of liberty never lose a feather

 

RSS | Mobile
Page created in 0.034 seconds with 29 queries.
© 2002-2025 Taperssection.com
Powered by SMF