Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: save on March 27, 2003, 04:34:33 PM

Title: mirroring channels in soundforge?
Post by: save on March 27, 2003, 04:34:33 PM

i have a recording that i'm trying to fix that the right channel cuts out for the last 2 mins of the show.  Basically what i'm trying to do is mirror the last 2 mins from the left channel.  I've looked everywhere and can't figure out where to do this at?  If u can't do it in soundforge is there another program that will let u do this?

Thanks!
Justin

Title: Re:mirroring channels in soundforge?
Post by: Craig T on March 27, 2003, 04:55:52 PM

I think it is in the "channel mixer" tool.  There should be a preset for "mirror left to right" or something similar.  I know its there somewhere - I've had to do the same thing before.

Title: Re:mirroring channels in soundforge?
Post by: hippies on March 27, 2003, 04:58:32 PM

Soundforge will do this operation just fine.  here's what you do:

1)  highlight and delete unwanted portion of bad channel
2)  highlight and 'copy' SAME portion of remaining good channel
3)  'paste' this section into the incomplete channel

VIOLA!

easy move.  should take ya all of a minute to accomplish!  

hope this helps.

~S

Title: Re:mirroring channels in soundforge?
Post by: danmorgan on March 27, 2003, 06:21:46 PM

Tools>repair>copy other channel

Title: Re:mirroring channels in soundforge?
Post by: save on March 27, 2003, 11:42:18 PM

Thanks guys!

-Justin

Title: Re:mirroring channels in soundforge?
Post by: DaryanLenz on March 28, 2003, 12:22:01 AM

Justin,

I had better see you at moe on thursday!

Daryan

Title: Re:mirroring channels in soundforge?
Post by: save on March 28, 2003, 12:48:14 PM

don't worry i'll be there  ;D  i still need to get my tix though....u think it'll sell out?  hopefully if i get a break from moving today i'll run to hyvee and get one.  i'm gonna talk to the guy i bought our house from and see if he'll bring his mod sbm-1 so i can run it w/ my rig and see if i like it...if so i think im gonna buy scott's mod sbm-1  ;)

-Justin

Title: Re:mirroring channels in soundforge?
Post by: save on March 28, 2003, 12:52:25 PM

u going to Big Wu on this tuesday @ the green room?  I'm pretty sure i'll be there!

-Justin