Become a Site Supporter and Never see Ads again!

Author Topic: Nakamichi MX-100_Power_Schematic  (Read 20759 times)

0 Members and 1 Guest are viewing this topic.

Offline gdplusmore

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 177
  • Gender: Male
Nakamichi MX-100_Power_Schematic
« on: August 28, 2009, 06:43:39 PM »
Nakamichi MX-100_Power_Schematic

Link to purchase  mini din connectors

http://www.hosfelt.com/en-us/dept_173.html

other parts for battery box can be obtained at radio shack   
NAK CM-300's  -> CP4's,CP-3's,CP2's,CP1's ->SonyD5
NAKCM-300's ->  CP4's,CP-3's,CP2's,CP1's ->MX-100-->NJB3
NAK CM-100's  -> CP4's,CP-3's,CP2's,CP1's ->SonyD5
NAKCM-100's ->  CP4's,CP-3's,CP2's,CP1's ->MX-100-->NJB3
Sony PCM-M10  (looking at stealth mic options)

Offline ziko

  • Trade Count: (28)
  • Taperssection Member
  • ***
  • Posts: 457
Re: Nakamichi MX-100_Power_Schematic
« Reply #1 on: August 29, 2009, 01:44:27 PM »
Is that schematic right? I believe the batteries hooked that way are 18 volts. not saying it won't work but I do not believe its 9 volts. postive to postive/negative to negative=9volts

Offline gdplusmore

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 177
  • Gender: Male
Re: Nakamichi MX-100_Power_Schematic
« Reply #2 on: August 29, 2009, 04:49:15 PM »
This works for me...I had downloaded this from 

http://www.nakmics.com/   a few years back.  I  get at least 4 hours  per show

NAK CM-300's  -> CP4's,CP-3's,CP2's,CP1's ->SonyD5
NAKCM-300's ->  CP4's,CP-3's,CP2's,CP1's ->MX-100-->NJB3
NAK CM-100's  -> CP4's,CP-3's,CP2's,CP1's ->SonyD5
NAKCM-100's ->  CP4's,CP-3's,CP2's,CP1's ->MX-100-->NJB3
Sony PCM-M10  (looking at stealth mic options)

Offline DSatz

  • Site Supporter
  • Trade Count: (35)
  • Needs to get out more...
  • *
  • Posts: 3382
  • Gender: Male
Re: Nakamichi MX-100_Power_Schematic
« Reply #3 on: December 25, 2009, 11:57:00 PM »
ziko, the batteries are connected in series, but notice that the "center point" between them is connected to the ground pin of the connector. This means that they will actually supply -9 Volts and +9 Volts respectively to the preamp, which is close enough for rock 'n' roll in this case.
music > microphones > a recorder of some sort

Offline LeftoverSammy

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 504
  • Gender: Male
  • MG's FUCKIN' A!!
Re: Nakamichi MX-100_Power_Schematic
« Reply #4 on: December 18, 2022, 05:11:05 PM »
Its right, I drew up that sketch ages ago and posted it someplace on the webs. I got it from some other Nak guru at the time. Worked for me and was very reliable. Funny to come see this dwg come full circle. I have been semi retired for about 6yrs now from the taping scene but have been considering getting back into it in 23'.
Microtech Gefell SMS2000's (M20 & M21 caps) > Luminous Audio Monarch II's or Audio Magic Silvers > MixPre 3
Grace Designs V3
Marantz PMD661
Core Sound Stealthy Cardiod mics > Battbox> Tascam DR-7

Former Nak CM300 & CM700 Vet (CP1, CP2, CP3 & CP4 caps), MX-100

Its 420.....24/7.....365!! :-)

 

RSS | Mobile
Page created in 0.025 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF