Become a Site Supporter and Never see Ads again!

Author Topic: Talentcell 12V Battery and Sound Devices 722  (Read 9203 times)

0 Members and 1 Guest are viewing this topic.

Offline ts

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 3663
  • Gender: Male
Talentcell 12V Battery and Sound Devices 722
« on: July 27, 2019, 08:43:17 AM »
I have a Talentcell that I originally used to power my V2 and based on a thread here I decided to try it on my 722. Not using it to power both the V2 and 722, just one or the other. Worked great on the V2. Would run it for days. With the 722, once the charge indicator on the battery drops one light the 722 battery icon starts blinking a low voltage warning. Not sure what the low voltage setting should be on the 722 for an external battery. The lowest setting is 10V. If I drop it down to that the warning stops. Any Ideas?

https://www.amazon.com/TalentCell-Rechargeable-11000mAh-14500mAh-26400mAh/dp/B016BJCRUO/ref=sr_1_5?crid=KZZKVIVO1XZA&keywords=talentcell+rechargeable+12v&qid=1564230996&s=gateway&sprefix=Talentcell%2Caps%2C152&sr=8-5
« Last Edit: July 28, 2019, 08:27:39 AM by ts »

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: Talentcell 12V Battery and Sound Devices 722
« Reply #1 on: July 28, 2019, 12:52:07 AM »
id ask SD what effect powering with 10V has on specs. in some designs lower voltage just reduces headroom slightly
« Last Edit: July 29, 2019, 02:38:49 AM by jerryfreak »
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline ts

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 3663
  • Gender: Male
Re: Talentcell 12V Battery and Sound Devices 722
« Reply #2 on: July 29, 2019, 11:18:52 AM »
id ask SD what effect powering with 10V has on specs. in some designs lower voltage just reduces headroom slightly

I also think I have battery issues. The Talentcell won’t fully charge, no matter how long I leave it plugged in.


Edit 1: Per the manual the 722 can run on a 10 - 18 VDC 2 amp minimum. It then shuts down when the external reaches 9 volts. It will auto switch to the rear Lion if one is attached. Setting the warning threshold indicator to 10V which is the lowest setting is probably OK but will check with SD anyway. Also figured out the charging issue. I was using the wrong charger. :facepalm: I really need to mark these things. So many of them.

Edit 2:  talked to SD today. He was unfamiliar with the Talentcell but said as long as it meets the specs in the manual it should be OK. Setting the low threshold warning to 10V is also ok. Im running a test now to see how long it will last. Like I said it ran my V2 for almost 3 days straight.

Edit 3: in case anyone is listening, the Talentcell mentioned above ran the 722 (cf card only) for over 12 hours continuous and still had two bars lit! One of these days I’ll check the card to see how long it really lasted.  :coolguy:
« Last Edit: August 03, 2019, 01:15:06 PM by ts »

 

RSS | Mobile
Page created in 0.022 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF