Become a Site Supporter and Never see Ads again!

Author Topic: SD788 powering options?  (Read 12795 times)

0 Members and 1 Guest are viewing this topic.

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat
SD788 powering options?
« on: March 09, 2020, 11:28:41 PM »
Any suggestions. Looking at omnicharge 20 or ultimate. Really don’t want to drop $400 on a battery!
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline taper420

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1039
  • Gender: Male
Re: SD788 powering options?
« Reply #1 on: March 10, 2020, 02:06:44 AM »
I would go with an external 18650 enclosure. That's gonna be your most economical solution. A 6-cell enclosure will run about $15 and good cells about $5 each. A charger will be about $10-15. The specs on the 788 say minimum 1 amp supply and 6 X 3400mAh cells at 12v should give you about 6000mAh, which would be about 6 hours of operation (give or take). You could go with a with a dummy L-mount or the hirose connector to a 5.5mmX2.1(or 2.5 depending on model)mm connector. There's another enclosure I know of that takes 8 X 18650s, so would give you a longer run time, but it's around $40.

I have all the hardware I'm talking about bookmarked on Aliexpress but you need to login to view it. I could find links for the same stuff on ebay with a bit of a higher price. As for the 18650 cells, shopping for those can be a hassle. You want to go for name brand but you need a trusted source. I like Panasonic, but LG, Sony, and Samsung make good batteries, too. 3500mAh is about the max you will find from honest vendors. Some no-name brands will claim much higher capacity but those are obvious fakes. The thing to watch out for are the counterfeit name-brand cells. That's why you should find a reputable dealer and don't be suckered in by low prices. You get what you pay for, and that should be about $5 retail for the better name-brand cells.

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: SD788 powering options?
« Reply #2 on: March 10, 2020, 03:59:08 AM »
are those protected cells? or unprotected cells with protection circuits in the enclosure? theres quite a difference in price between unprotected and individually protected cells
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline taper420

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1039
  • Gender: Male
Re: SD788 powering options?
« Reply #3 on: March 10, 2020, 10:41:39 AM »
They are unprotected... the protection is in the enclosure.

Offline pohaku

  • Site Supporter
  • Trade Count: (35)
  • Taperssection All-Star
  • *
  • Posts: 1093
  • Gender: Male
Re: SD788 powering options?
« Reply #4 on: March 10, 2020, 10:54:40 AM »
Talentcell batteries work just fine.  Hit up Ted for an appropriate cable.
Mics: akg c460 (ck61, ck63), c414buls, c568eb; at4049a, 4051a, 4053a, at853; josephson c42; neumann U87, km84i; beyer m130, m160, m500; aea r84; gefell m71, mt711s, m200, m201, um70S; sony c38; schoeps cmc6, CMBI (mk4, mk21, mk41, mk4v); sennheiser mkh30, mkh40, md421, md431, md541; audix m1290
Pres: API, a-designs, pendulum, purple, millennia TD-1 and HV-32P, gt, littlebox, tinybox, usbpre2, CA 9200, pipsqueak, grace V2, DAV BG1
Cables: KCY, CMR, Naiant AKG actives, PFAs, asst.  GAKables and Darktrain
Recorders/converters/monitors: dr680, m10, dr-2d, d50, zoom f8 & F8n pro, 788T SSD CL-8, lynx aurora 8, Neumann KH20


Yeah, I'm an attorney, but everyone needs a day job

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat
Re: SD788 powering options?
« Reply #5 on: March 28, 2020, 01:40:13 PM »
The newer large Talentcell battery will not power up the 788. I know the batter works, because it powers my Portico 5012. Super weird
« Last Edit: March 28, 2020, 09:53:15 PM by Big Perm »
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline thunderbolt

  • Trade Count: (37)
  • Taperssection All-Star
  • ****
  • Posts: 1031
  • Gender: Male
  • Music est vita!
Re: SD788 powering options?
« Reply #6 on: March 28, 2020, 11:21:37 PM »
Just curious:  Do you need all-day power (I.e., festival)?  How many channels do you usually run?  Number of those requiring phantom? 

I’ve run 4 channels of phantom and 2 line-in on an FP-970 (L) and got 2-3 hours easy.  Two-three batteries usually covers it.  I still have three Tekkeon multivoltage that run it longer, but I guess those were discontinued a few years ago.
« Last Edit: March 28, 2020, 11:23:42 PM by boltman »

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5993
  • Gender: Male
  • Maplewood, MN
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline pohaku

  • Site Supporter
  • Trade Count: (35)
  • Taperssection All-Star
  • *
  • Posts: 1093
  • Gender: Male
Re: SD788 powering options?
« Reply #8 on: March 29, 2020, 12:05:28 PM »
The newer large Talentcell battery will not power up the 788. I know the batter works, because it powers my Portico 5012. Super weird

That’s odd.  I have a couple two year old talentcells and they work just fine for it.  I have not bought one of the newer large talentcells yet.  Anyone else have issues powering gear with the new talentcell?
Mics: akg c460 (ck61, ck63), c414buls, c568eb; at4049a, 4051a, 4053a, at853; josephson c42; neumann U87, km84i; beyer m130, m160, m500; aea r84; gefell m71, mt711s, m200, m201, um70S; sony c38; schoeps cmc6, CMBI (mk4, mk21, mk41, mk4v); sennheiser mkh30, mkh40, md421, md431, md541; audix m1290
Pres: API, a-designs, pendulum, purple, millennia TD-1 and HV-32P, gt, littlebox, tinybox, usbpre2, CA 9200, pipsqueak, grace V2, DAV BG1
Cables: KCY, CMR, Naiant AKG actives, PFAs, asst.  GAKables and Darktrain
Recorders/converters/monitors: dr680, m10, dr-2d, d50, zoom f8 & F8n pro, 788T SSD CL-8, lynx aurora 8, Neumann KH20


Yeah, I'm an attorney, but everyone needs a day job

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat
Re: SD788 powering options?
« Reply #10 on: March 30, 2020, 08:36:31 PM »
Just curious:  Do you need all-day power (I.e., festival)?  How many channels do you usually run?  Number of those requiring phantom? 

I’ve run 4 channels of phantom and 2 line-in on an FP-970 (L) and got 2-3 hours easy.  Two-three batteries usually covers it.  I still have three Tekkeon multivoltage that run it longer, but I guess those were discontinued a few years ago.

I run either 6 or 8 channels most of the time. Typically one 2 channels using phantom if any
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5993
  • Gender: Male
  • Maplewood, MN
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat
Re: SD788 powering options?
« Reply #12 on: March 31, 2020, 03:13:46 PM »
ordered!
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline IronFilm

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 213
  • Sound Recordist for Film/TV in New Zealand
    • IronFilm
Re: SD788 powering options?
« Reply #13 on: April 23, 2020, 09:17:39 PM »
Any suggestions. Looking at omnicharge 20 or ultimate. Really don’t want to drop $400 on a battery!

$400?? Nobody is spending that much on a single battery!

Why not just use an e-Smart battery? That's what everyone in the industry is transitioning to for powering their Sound Devices recorders.

In fact Sound Devices' latest 8 series recorders even have built in telemetry for the e-Smart batteries so you can see that info on your display.

Only US$160 for 98Wh:

https://www.trewaudio.com/product/remote-audio-hi-q/

That's cheaper than a NP-1 battery of that size was!

 

RSS | Mobile
Page created in 0.042 seconds with 37 queries.
© 2002-2024 Taperssection.com
Powered by SMF