Become a Site Supporter and Never see Ads again!

Author Topic: DAT Long Play 12 bit/32 kHz transfers  (Read 33280 times)

0 Members and 1 Guest are viewing this topic.

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 356
  • Sverige/Sweden/Suède
Re: DAT Long Play 12 bit/32 kHz transfers
« Reply #30 on: January 02, 2021, 06:30:15 AM »
PCM encoding is considered linear because the steps are all the same "size" (voltage and time)
Not all encoding must be linear.
ATRAC for instance, (Sony minidisc format) and DSD are types which are non-linear.

Thank you for explaining this.
"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6162
Re: DAT Long Play 12 bit/32 kHz transfers
« Reply #31 on: January 07, 2021, 10:56:53 AM »
PCM encoding is considered linear because the steps are all the same "size" (voltage and time)
Not all encoding must be linear.
ATRAC for instance, (Sony minidisc format) and DSD are types which are non-linear.

Thank you for explaining this.
Thanks for the opportunity.
Imagine the savings, if you could figure out which samples needed more resolution and which required less?!
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

 

RSS | Mobile
Page created in 0.02 seconds with 25 queries.
© 2002-2024 Taperssection.com
Powered by SMF