Become a Site Supporter and Never see Ads again!

Author Topic: Talentcell to SD Mix Pre 3/6  (Read 6541 times)

0 Members and 1 Guest are viewing this topic.

Offline ts

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 3663
  • Gender: Male
Talentcell to SD Mix Pre 3/6
« on: April 30, 2023, 04:08:36 PM »
Anyone ever try this? Talentcell has 5V, 9V and 12V outputs.

Offline Twenty8

  • Trade Count: (13)
  • Taperssection Member
  • ***
  • Posts: 516
  • Heading for a better thesis
Re: Talentcell to SD Mix Pre 3/6
« Reply #1 on: April 30, 2023, 08:23:59 PM »
6ii.  Talentcell, 12v via custom hirose cable > SD MX Hirose sled.
Open/Closed ~ AT U853 (subc, h, c, o):
Decks ~ MixPre 6ii, A10, M10
Pres ~ 2x Oade mod UA-5 (W+, ACM+)
Also ~ Line Audio CM3/CM4/OM1 : AT3031 : AT831 : DR2D

Offline ts

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 3663
  • Gender: Male
Re: Talentcell to SD Mix Pre 3/6
« Reply #2 on: May 01, 2023, 09:43:37 AM »
6ii.  Talentcell, 12v via custom hirose cable > SD MX Hirose sled.

Nice. I'll need to make a usb-c cable to the right size connector for the Talentcell 12V output.  I use the 9V output for my V2 and I think that's 5.5x2.1 and the 12V is 5.5x2.5? Or vice versa. I know those outputs have a different size pin. Or I can get one of those nice sleds! I do have the hirose cable already. What's better? The hawk-woods or the cable techniques.
« Last Edit: May 01, 2023, 11:38:03 AM by ts »

Offline Twenty8

  • Trade Count: (13)
  • Taperssection Member
  • ***
  • Posts: 516
  • Heading for a better thesis
Re: Talentcell to SD Mix Pre 3/6
« Reply #3 on: May 01, 2023, 01:32:06 PM »
Or vice versa.
Yes, you had that backwards.
12v is 5521
9v is 5525

My cable came with a battery during a YSale purchase so I can not really suggest a cable and I don't know who made it.  Tip to tail its 21", right angle, 5521 for 12v.  Never run my MP6ii any other way actually, but I am in the minority as most of the other members with the same battery/deck combo run USB to USB-C right angle.
Open/Closed ~ AT U853 (subc, h, c, o):
Decks ~ MixPre 6ii, A10, M10
Pres ~ 2x Oade mod UA-5 (W+, ACM+)
Also ~ Line Audio CM3/CM4/OM1 : AT3031 : AT831 : DR2D

Offline ts

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 3663
  • Gender: Male
Re: Talentcell to SD Mix Pre 3/6
« Reply #4 on: May 01, 2023, 04:13:29 PM »
Thanks! I ordered a hirose sled since I already had the cable. I used to get crazy run times off the Talentcell powering a 722 and V2. Hoping I get the same with the MixPre 6 and V2.

 

RSS | Mobile
Page created in 0.027 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF