Become a Site Supporter and Never see Ads again!

Author Topic: Fixing a once off talker. Ideas?  (Read 17709 times)

0 Members and 1 Guest are viewing this topic.

Offline shadowfax1007

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
  • Gender: Male
    • BNELive
Fixing a once off talker. Ideas?
« on: April 27, 2024, 07:59:25 AM »
I've got an old recording of mine which overall I love - except for one track which almost ruins the listening experience for me.
At the 3:14 mark you here a drunk girl talking nearby to me, picked up strongly on the right channel.

I've experimented several times over the years with various audio tools, but I've never really been able to reduce it in a way that doesn't harm the experience too much. I'm kind of hoping some more seasoned editing veterans might be able to have a quick look at this one and make some suggestions for me? Please.
Alternatively I've got RX10 if people have settings/tools to suggest trying.

I've posted a link to the MP3 of the track itself, but I have the whole gig in it's original WAV format if the edit is required overall.


https://we.tl/t-It3luggwy4

Thanks!
www.bnelive.net

Mics:
SP-CMC-2 (Cardioid & Sub-Cardioid caps)
SP-BMC-12 (Omni)
SP-BMC-1 (Omni - retired)

Power:
SP-SPSB-10

Recorders:
Olympus LS-10
Olympus LS-12
Sony PCM-A10

Offline Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11821
  • Gender: Male
    • my list
Re: Fixing a once off talker. Ideas?
« Reply #1 on: April 27, 2024, 09:37:10 AM »
Look at it in RX and figure out what her voice looks like (easy to spot).  Use the brush tool or lasso then spectral repair attenuate.  This was a quick attempt to tone it down.  It could be done better but you get the idea....


https://we.tl/t-SizfXMKKCb
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline breakonthru

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 263
Re: Fixing a once off talker. Ideas?
« Reply #2 on: April 27, 2024, 11:54:30 AM »
Its REALLY hard to get conversation out of a recording as it’s not sharp and sudden and it’s in the same frequency range as the music

When it’s hard on one channel the first thing I do is subtly swap channels via long fades. The image will collapse into mono and be noticeable on headphones but sometimes not noticeable at all when played back on speakers

Perhaps some combination of the above, where at first you try to reduce it on the one channel as much as possible, and then swap the channels as little as possible to try to maintain a little bit of image, and use the slight channel swap to partially cover up the manual work you did to remove the tower, which is not without consequences to the rest of the recording

Offline nassau73

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 159
Re: Fixing a once off talker. Ideas?
« Reply #3 on: April 27, 2024, 08:09:19 PM »
Look at it in RX and figure out what her voice looks like (easy to spot).  Use the brush tool or lasso then spectral repair attenuate.  This was a quick attempt to tone it down.  It could be done better but you get the idea....

True. Work in the RX Spectrogram View. The voice of the "talker" will be viewable as concentric lines in the area where they are talking.

This is a process I follow when I'm willing to be truly anal about getting rid of the talking. It's very time consuming so judge what you are willing to commit. I've been going back to some of my old 24 bit files and "fixing" ones that I want to listen to without the talking and screaming. This is also the process I follow when the talking is interfering with the music or vocals. If I want to bring down crowd noise between songs - that's different.

Remember that the loudest part of the talker will be closer to the bottom of your view.

That in mind, once I locate the the concentric lines of the talker, I go to the bottom of the display and SELECT a small area using the BOX SELECT TOOL that's the rightmost tool in the icons.

Then I use the magnifying glass icon that has the dotted lines around it. This magnifies everything so that now it's easy to start highlighting individual lines of the talker. I use the paintbrush tool set to a size that allows me to select the lines of the talker without affecting the surrounding areas. I start at the bottom and many times have to select every other line rather than the lines next to each other.

Once those are highlighted, I use the harmonic tool to select the harmonics out of range of the smaller selection that I'm viewing. Now attenuate or delete in spectral repair.Then I do the rinse and repeat thing - go back to what I missed the first time and do it again.

After I did this for awhile, I learned that I could see the talker lines in the middle of a vocal or interfering with the music so it's possible to really clean things up.

On recordings that I want to listen to and have egregious talker intrusions and am willing to spend the time - this has been working for me. My computer doesn't have the resources to split stems, etc.

Good luck if you try this.
« Last Edit: April 27, 2024, 08:11:31 PM by nassau73 »

Offline robgronotte

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 354
Re: Fixing a once off talker. Ideas?
« Reply #4 on: April 27, 2024, 08:40:21 PM »
If the talk isn't over any singing, Ultimate Vocal Remover 5 is amazing, you can download for free online. I've used it so much in the last year that I consider myself an expert.

I would be happy to work on it. Would be great to let people hear the before and after.

Offline breakonthru

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 263
Re: Fixing a once off talker. Ideas?
« Reply #5 on: April 28, 2024, 01:10:08 AM »
It would be super valuable if you documented this process while doing it so we can all learn

Offline shadowfax1007

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
  • Gender: Male
    • BNELive
Re: Fixing a once off talker. Ideas?
« Reply #6 on: April 28, 2024, 06:54:29 AM »
Look at it in RX and figure out what her voice looks like (easy to spot).  Use the brush tool or lasso then spectral repair attenuate.  This was a quick attempt to tone it down.  It could be done better but you get the idea....


https://we.tl/t-SizfXMKKCb

This actually sounds much better. Still not perfect, but helps remove the harshness of it. I'll definitely be giving this a decent crack this week. Thank you.
www.bnelive.net

Mics:
SP-CMC-2 (Cardioid & Sub-Cardioid caps)
SP-BMC-12 (Omni)
SP-BMC-1 (Omni - retired)

Power:
SP-SPSB-10

Recorders:
Olympus LS-10
Olympus LS-12
Sony PCM-A10

Offline shadowfax1007

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
  • Gender: Male
    • BNELive
Re: Fixing a once off talker. Ideas?
« Reply #7 on: May 06, 2024, 06:19:35 AM »
If the talk isn't over any singing, Ultimate Vocal Remover 5 is amazing, you can download for free online. I've used it so much in the last year that I consider myself an expert.

I would be happy to work on it. Would be great to let people hear the before and after.

I'll do a general write up soon on my experience - but holy crap UVR5 worked great. It certainly wasn't a single click solution but after a few hours of tweaking with UVR5, Audacity and Izotope, I got a great outcome. Managed to speak the lead vocals and the "backing vocals" and blend the lead only back with the instrumental. Then pasted the exact clip back into my overall recording. You almost can't tell it was there to begin with. The intrusive vocal is totally gone now. The remaining actual vocals are ever so slightly muffled for like 1.8 seconds, but listening to the entire recording you can't really pick it. It's just like the singer has moved slightly from the microphone for a minute.

Fantastic bit of software!
www.bnelive.net

Mics:
SP-CMC-2 (Cardioid & Sub-Cardioid caps)
SP-BMC-12 (Omni)
SP-BMC-1 (Omni - retired)

Power:
SP-SPSB-10

Recorders:
Olympus LS-10
Olympus LS-12
Sony PCM-A10

Offline shadowfax1007

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
  • Gender: Male
    • BNELive
Re: Fixing a once off talker. Ideas?
« Reply #8 on: May 07, 2024, 04:24:52 AM »
So far anyone wanting the process I followed:

1. - Audacity
- Set 'Start' and 'End' markers around the problem section.
- Copy the problem section to a new track
- Export the new track only, ensuring to save in the same format and bitrate
- Save the project file with markers, or just keep the window open.

2. - UVR5
- Download the following models if not already installed: KIM1, UVR-BNE-4B, UVR-Deecho-Deverb
- Set process method to MDX-Net
- Set model to Kim Vocal 1
- Go to Settings > Advanced > Advanced MDX > Vocal Splitter
- Select model UVR-BNE-4B
- Select "Save Split Vocal Instruments" and "Enable Vocal Split Mode"
- Select "Deverb Vocals" and enable "All Types"
- Go back to the main screen, process your input audio.
- UVR5 will output individual stems, and various combined steams such as "Instrumental + Backing Vocals" or "Instrumental + Main Vocals"
- Listen to your output and see how it goes.
- You can experiment further with Segment Size and Overlap but the higher you go, the longer it will take and the more grunt your PC will need to have.
- Some people recommend using Kim Vocal 2 model if Vocal 1 model doesn't give the required result. In my case, I found no noticeable difference between the two.
- Make sure you export your audio in the same format and bitrate.

3. - Import back into Audacity
- Go back to Audacity
- Select the range set by your markers, it should come up in yellow and lock your selection to the exact time.
- Copy and paste your new audio over your main track
- Your new audio should be pasted over the old offending segment and time matched. Playback to confirm, and adjust if needed.
- Export your audio to a new master .WAV file
- Import the new master into RX Izotope or whatever editing software you use.

Enjoy!
www.bnelive.net

Mics:
SP-CMC-2 (Cardioid & Sub-Cardioid caps)
SP-BMC-12 (Omni)
SP-BMC-1 (Omni - retired)

Power:
SP-SPSB-10

Recorders:
Olympus LS-10
Olympus LS-12
Sony PCM-A10

Offline robgronotte

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 354
Re: Fixing a once off talker. Ideas?
« Reply #9 on: May 07, 2024, 08:02:34 AM »
The best model I've found in UVR5 is MDX-Net MDX23C-InstVoc HQ.

but I usually run the ensemble mode which does three models and then combines the results, and I pick the best of the 4.

the other two I use are VR Arc1_HP-UVR and Demucs v4 | htdemucs

Offline shadowfax1007

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
  • Gender: Male
    • BNELive
Re: Fixing a once off talker. Ideas?
« Reply #10 on: May 07, 2024, 08:55:29 AM »
The best model I've found in UVR5 is MDX-Net MDX23C-InstVoc HQ.

but I usually run the ensemble mode which does three models and then combines the results, and I pick the best of the 4.

the other two I use are VR Arc1_HP-UVR and Demucs v4 | htdemucs

If you're still willing to have a go, I'd be keen to see what you can do with this sample?
I've included the original .wav file slice and my version I ended up eventually.
www.bnelive.net

Mics:
SP-CMC-2 (Cardioid & Sub-Cardioid caps)
SP-BMC-12 (Omni)
SP-BMC-1 (Omni - retired)

Power:
SP-SPSB-10

Recorders:
Olympus LS-10
Olympus LS-12
Sony PCM-A10

Offline robgronotte

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 354
Re: Fixing a once off talker. Ideas?
« Reply #11 on: May 07, 2024, 07:55:28 PM »
Your old WeT link is dead and I don't see a new one.

Offline ol' dirty taper

  • Trade Count: (7)
  • Taperssection Member
  • ***
  • Posts: 534
  • Gender: Male
  • I've been riding with the ghost...
    • Ancient Earth
Re: Fixing a once off talker. Ideas?
« Reply #12 on: May 07, 2024, 09:37:27 PM »
Would UVR work for someone who was eating chips in a bag underneath one of my mics?
Mic : Schoeps MK21 | Microtech Gefell M300 | Beyer MC950 MC930 MC910 CK930 | Line Audio OM1 | DPA 4061 | Naiant X-X Omni | Beyer TG L34C | AT831s
Pre : Aerco MP-2 | Naiant Littlebox
Deck : SD MixPre 10 II | SD MixPre 6 II | Sony PCM-A10 | Zoom F3
Pho/Vid : Sony a58 | Panasonic ZS100 | DJI Osmo Pocket

Offline shadowfax1007

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
  • Gender: Male
    • BNELive
Re: Fixing a once off talker. Ideas?
« Reply #13 on: May 07, 2024, 11:21:32 PM »
Your old WeT link is dead and I don't see a new one.

Apologies - not sure what happened with my last comment.
https://we.tl/t-FTlMnRHAsW

Try that
www.bnelive.net

Mics:
SP-CMC-2 (Cardioid & Sub-Cardioid caps)
SP-BMC-12 (Omni)
SP-BMC-1 (Omni - retired)

Power:
SP-SPSB-10

Recorders:
Olympus LS-10
Olympus LS-12
Sony PCM-A10

Offline robgronotte

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 354
Re: Fixing a once off talker. Ideas?
« Reply #14 on: May 08, 2024, 12:40:26 AM »
Would UVR work for someone who was eating chips in a bag underneath one of my mics?

Probably not, it's somehow tuned to voices, not miscellaneous noises like that. Probably could be done on izotope RX but would be tedious if it lasted very long.

 

RSS | Mobile
Page created in 0.045 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF