Become a Site Supporter and Never see Ads again!

Author Topic: Resistance to filming with a camcorder  (Read 22272 times)

0 Members and 1 Guest are viewing this topic.

Offline fanofjam

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 589
Re: Resistance to filming with a camcorder
« Reply #30 on: September 03, 2024, 05:29:17 PM »
I agree with the other tapers here.  I stopped buying commercial video's ten years or more ago unless I'm able to actually experience the video first.  LOTS of commercial videos are total garbage.  Like you guys already said, they're a spastic nightmare with ridiculous editing or the audio is total crap.  I watched a commercial video not so long ago where they obviously had a SBD and an AUD matrixed together, but they never eliminated the delay between the two sources, so the entire video had that characteristic echo with the annoying slapback of every drum beat.  After awhile, I couldn't listen/watch anymore. 
« Last Edit: September 03, 2024, 05:30:54 PM by fanofjam »

Offline lowlight10

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1059
Re: Resistance to filming with a camcorder
« Reply #31 on: October 08, 2024, 05:41:52 PM »
Unfortunately the ZS100 has become hard to find. Is there a new option? I have SBD access with my favorite artist, so now that I have audio easily covered, I am looking to do video as well.

Offline yltfan

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2603
Re: Resistance to filming with a camcorder
« Reply #32 on: October 11, 2024, 05:41:18 PM »
I agree with the other tapers here.  I stopped buying commercial video's ten years or more ago unless I'm able to actually experience the video first.  LOTS of commercial videos are total garbage.  Like you guys already said, they're a spastic nightmare with ridiculous editing or the audio is total crap.  I watched a commercial video not so long ago where they obviously had a SBD and an AUD matrixed together, but they never eliminated the delay between the two sources, so the entire video had that characteristic echo with the annoying slapback of every drum beat.  After awhile, I couldn't listen/watch anymore.

Guided by Voices was selling audio recordings like that a few years ago. And they shut down board feeds for tapers. Tons of us were like "please let us do a proper job of this, your taper is bad".
Mics: AT4051, AT4053, KM140, AKG C414, Beyerdynamic MEM86 guns, Nak cm300, AT853 4.7mod
Pre: V3, CA-9100
Recorders: Busman DR-680, iRivers, minidisc, jb3, and DAT

Dime torrents: http://www.dimeadozen.org/account-details.php?id=88009

Online tjj5036

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 176
    • Rage Against the Machine Live Archive
Re: Resistance to filming with a camcorder
« Reply #33 on: November 11, 2024, 01:43:04 PM »
Unfortunately the ZS100 has become hard to find. Is there a new option? I have SBD access with my favorite artist, so now that I have audio easily covered, I am looking to do video as well.

I had an interesting conversation with one of the guys that works at the local camera store and he said that many of these point-n-shoots are back ordered and likely won't have stock replenished. The market for them isn't really what it used to be in the age of smart phones with pretty good cameras built in. Folks either are content with their smart phones or jump to "low pro" setups where you have a small frame with a detachable lens, such as a Sony A6400 or even the ZV-E1. The market for that in-between segment isn't worth it for companies to target. I will rock my ZS100 till the day it dies but I did get a FX30 to shoot at shows where I can get permission.
Bay Area taper that runs http://ratm.live . Please get in touch if you have any Rage recordings or know anyone that taped Rage! Always happy to tape a Bay Area show, get in touch if you want someone taped!

Mics: MK4s, AT853s, CA-14s/CA-11s
Battery/Pre: NBox+, Babynbox, SP-SPSB-10, CA-9200, Naiant Littlebox
Recorder: PCM-A10, Marantz PMD 661
Video: Panasonic ZS100

 

RSS | Mobile
Page created in 0.024 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF