Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: texasmfp on April 13, 2010, 01:09:02 PM
-
Hi:
I have a Cooper CS104 mixer with the Direct Out option. I noticed that the 1K test tone only comes out via the regular XLR outputs, rather than through the direct out 10-pin Hirose cable. First question is, are one of the many many unmarked jumpers inside able to direct the tone out of the 10-pin Hirose direct out? If not, then what procedures would I use to set the Unity Gain on the recorder when I am recording from the direct out cables? Would I set the gain with the regular XLR outputs and then swap to the direct out? I could do that, but I am not sure that the levels would be accurate? Thanks in advance to all you Cooper gurus.
Thanks