As a potential future buyer of the F8, I'm curious about the tactile difference between the stock and aftermarket knobs. Just looking at the pictures, I would think the stock knobs would be easier to manipulate and have an idea of where you were just be feel simply because of their shape.
I agree! Since there aren't any markings on the larger aftermarket knobs, they must be a PITA to know where they are on the levels/knobs! id rather deal with the smaller stock knobs, since they at least have a marking on the knob to know where you are at gain-wise on the levels/knobs! Does that make sense?
Long weekend with the f8 finally. Kinda weird doing a festival on my first outing with new gear!
Havent listened to all of my recordings yet. What i did sounded great.
That being said. Im not sold on the f8 at all. Feels like the level meters are about half as responsive as im used to. Several buttons that arent illiminated during use that should be, is the stop button supposed to be illuminated?
While i do have an amzing setup on the inout cables, and bag setup, the 1/4 inputs make it awkward to get in and out of the bag to mess wth AA's at all
I loved having the aa's in there, it saved me a few secs on a set i was running late too. Power up and hit record then mess with batt setup.
My days of carrying so much gear are over. I hauled my whole setup out to Family Groove Company thursday, then half of it sat in the rv the rest of the weekend! I think the only way i could carry 4ch is to switch out my vms for another nbox. Eliminating all the cables, batteries, pfas and everything that comes with that
If i could do it all over again id have two kcy cables instead of normal nbobs. What a pain
Cayman, can you please elaborate on why you didn't like dealing with the NBob KCY's, either in this thread or a PM? Thanks
Because personally, my NBob's are EASIER to deal with than my Schoeps KCY 250/5, since I can easily connect/disconnect the "Collettes" section of the NBob KCY from the rest of the KCY cable/extension. This makes putting my NBob KCY up or tearing it down much quicker IMO! In fact, I want Nicky to mod my KCY 250/5, to a 250/05, by putting another Binder[Series 712 this time around] connection about 6" or so AFTER the "KCY Junction Box", just like my NBob KCY is! That way I can disconnect/connect the caps/collettes section to the KCY extensions that run to my VMS02IB & 70d
Also, you NEED a nice camera backpack for gear if you're doing 4 channel in one bag/setup IMO! At SCamp in the past, I ran [2] separate rigs, so I never had that much gear in one bag like you did! However, with this EveCase bag, it's NO problem carrying 4 channels worth of stuff in ONE bag
https://www.amazon.com/Evecase-Camera-Laptop-Travel-Backpack/dp/B00WQTLB0G?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00Also Cayman, if you keep the AAs in your F8 at ALL times, and just power it externally, then you shouldn't have to move the F8 around much! That way the 1/4" cables aren't such a PITA, and you don't have to access the back of the F8 nearly as often! Once my 70d is hooked up with all [4] XLRs to all 4 channels, it stays put, and I just have to SLIGHTLY move it around for new USB batteries, just like your F8 situation! I also leave some AAs in my 70d, just so it saves the date/time and stuff too! So once your cables are all plugged in, you should be good to go and shouldn't need to move your F8 around! That said, just like Rippleish20 said, having to use 1/4" cables for the LINE IN is just silly IMO! I MUCH prefer the locking connectors of XLR's, and I wish the F8 used XLR's for its LINE inputs instead of the non-locking 1/4" connectors!
My white knobs arrived today from Spain. Quick shipping as they were sent on May 24 arrived May 31.
I've included this pic of 4 knobs on and 4 off for comparison.
+T Thanks for the pic AA
Those are schweet knobs for sure! I'd love to hear if you guys prefer those knobs to the stock ones?