Taperssection.com

Gear / Technical Help => Playback Forum => Topic started by: scb on September 01, 2004, 11:35:43 PM

Title: center channel shelf?
Post by: scb on September 01, 2004, 11:35:43 PM

i'm putting a tv in the corner of a room.  i need to mount the center channel speaker above it.  it can't sit on the tv, so i need some sort of corner shelf that can hold this speaker (17 inches across).  anyone have any suggestions?

Title: Re: center channel shelf?
Post by: scervin on September 02, 2004, 07:13:06 AM

DIY?  I know they have corner shelves, but the one we have isn't anywhere near 17".  Get some strips of wood maybe an inch or so deep and 6-8 inches long.  Run these level out from the corner.  Cut a triangle with 17" sides which should leave you plenty for the speaker as I'm not sure the given depth.  Before mounting this paint the strip the wall color and paint the shelf a different one.  now mount the cut triangle piece to the strips.  Might cost ya $20 at most if you don't have paint around.
SC

Title: Re: center channel shelf?
Post by: jpschust on September 02, 2004, 08:41:54 AM

make sure you check the weight on it.  i ended up just having billy bags build me a shelf for mine.

Title: Re: center channel shelf?
Post by: scb on September 02, 2004, 09:54:53 AM

the speaker i want is 20 pounds....i might try to make a shelf.  gotta head back to home depot today after work anyway...

thanks

Title: Re: center channel shelf?
Post by: scervin on September 02, 2004, 03:24:26 PM

Just make sure to either screw into a stud or get some good wall anchors.  This shelf should hold it no problem.  I'd get a 2x4' sheet of 1/2" or 3/4" MDF and 2' of nice decoratice molding to put on the front edge. Paint and poly and you are good to go!

SC