0 Members and 1 Guest are viewing this topic.
need short (like 4 in or so, yeah really that short!) with mini quad, anyone make em?
Had a feeling... Anyone know a good place for right angle xlrs? need the ones that are moveable (not solid rt angle)
just an fyi you the xlr inputs on the mp2 are too close together to use neutrik right angle xlr connectors.
what about facing opposite directions?
I built some right angle xlrs for a guy on this site. The package that he sent me was unopened new parts, but they came missing the plastic piece for the inside that insulates, and holds down the actual pins. It was also missing a screw.I asked how he wanted to approach this, that I could try to jerry-rig a fix consisted of drilling a hole thru the center/back of the removeable top of the xlr, solder the connections, assembling the top back into place,......And then I filled the entire cavity of the xlr with hot glue (coolmelt). I then took a plumbers torch and heated the xlr body until the glue flowed into the cavity, and then filled it with more until the cavity was full, topped off.I then let the xlr to cool to room temp, and tried to take the top off,...... it wasn't going to budge!! no way!!So, with all that rambling behind me,..... You could prolly grind off the screw ears on the inside of each xlr, if you were to do what I did with gluing the xlr body cavity to a solid fill,.....Might be worth a try (?)
Quote from: AT853rxwh on June 09, 2004, 12:15:00 AMneed short (like 4 in or so, yeah really that short!) with mini quad, anyone make em?custom, by you