Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: seethreepo on March 13, 2018, 10:14:18 PM
-
For beyer ck930’s 21 mm diameter but short length as they are actives. Currently using the one from my studio projects c4 set
-
I use the Movo WSTT50 (https://www.amazon.com/Movo-Professional-Windscreen-Technology-Microphones/dp/B00YHTUCQM/) with my CM3s which are tiny, and I also use them with the Naiant X-Q which are even smaller than actives. Excellent performance, and cheap.
-
I use the AKG W90 or W32 for all my actives. They cover the cap and the collette, leaving the clip area exposed. I’ll post some pics when I get a chance. I even use these screens with my modded Naks. They are relatively inexpensive and you can always throw a small dead rat over them for the high winds.
-
I use the Movo WSTT50 (https://www.amazon.com/Movo-Professional-Windscreen-Technology-Microphones/dp/B00YHTUCQM/) with my CM3s which are tiny, and I also use them with the Naiant X-Q which are even smaller than actives. Excellent performance, and cheap.
Thanks Voltronic
They were on my radar but I wasnt sure if they would block the openings on the mics. I should have also mentioned Ideally they will be ok to run in a hat as I often do that. What diameter are your mics?/ opening on the movo's ?
-
I use the Movo WSTT50 (https://www.amazon.com/Movo-Professional-Windscreen-Technology-Microphones/dp/B00YHTUCQM/) with my CM3s which are tiny, and I also use them with the Naiant X-Q which are even smaller than actives. Excellent performance, and cheap.
Thanks Voltronic
They were on my radar but I wasnt sure if they would block the openings on the mics. I should have also mentioned Ideally they will be ok to run in a hat as I often do that. What diameter are your mics?/ opening on the movo's ?
They shouldn't block the vents on your actives. No good for a hat though, unless you're Pharell Williams! My mics are 20mm (CM3) and 19mm (X-Q). The opening on the Movo is difficult to measure exactly as it's a flexible rubber ring, but they state 18-24mm as the diameter they work with.
-
I use the Movo WSTT50 (https://www.amazon.com/Movo-Professional-Windscreen-Technology-Microphones/dp/B00YHTUCQM/) with my CM3s which are tiny, and I also use them with the Naiant X-Q which are even smaller than actives. Excellent performance, and cheap.
Thanks Voltronic
They were on my radar but I wasnt sure if they would block the openings on the mics. I should have also mentioned Ideally they will be ok to run in a hat as I often do that. What diameter are your mics?/ opening on the movo's ?
Movo’s are great for open taping, but seem useless in a hat. Try the inexpensive wintech screens.