Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: marc0789 on July 23, 2004, 09:24:03 AM
-
ssia. thanks, Marc.
>:( >:( >:( >:(
-
those are gain knobs? I thought they made the grill hotter ;D
-
that cant be good, did it always do that marc ???
i never hear audible noises when cranking gain on the v3 :P
-
i have never had that problem with the mme
-
never really ran 4022>mme for quiet music like that before. check out the parallel thread in the open forum. appatently this is normal for the mme, which blows.
ccm5>v3>hhb looking better. :P
-
i think you're just looking for reasons to justify your sluttiness 8)
-
ive never encountered this problem with my minime
-
never had that problem back when I ran the mini-me
-
did you have Doug upgrade it to the WSP model? audible buzzzzzzzzzzzzzzzzzz
-
never really ran 4022>mme for quiet music like that before. check out the parallel thread in the open forum. appatently this is normal for the mme, which blows.
At least now you know where to run your gains at for that type of show, so next time you probably won't have to make adjustments on the fly. No tweaking=no audible knob noise :)
ccm5>v3>hhb looking better. :P
No way!!!
-
yeah, no way is right. can't do it. :P Thanks, Ben.
Only reason I had trouble was because it was soooo damn quiet for that Junkies show. for the acoustic set, I had them me wide open, and it took me a minute or two to figure that out.
-
I've noticed this problem with my MME. I took it to be dirt in the pots and had some one take a stab at cleaning them. It lessened the noise a bit; but if I turn the knobs during quiet passages or just a test setup at home, I do still notice it a little bit.