Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: John Kelly on June 20, 2003, 11:11:36 PM

Title: Shockmounts advice
Post by: John Kelly on June 20, 2003, 11:11:36 PM

Right now I'm using a pair of at933s with the SoundPro's gooseneck tbar.  I've liked everything so far, but I'm finding that I need a shockmount for when my stand gets bumped by the drunk wooks.  Is there any way for me to do this?  Obviously I can't use things like the at8410's as the mics are the size of a dime...  

Thanks.

Title: Re:Shockmounts advice
Post by: Just Taper Mark from NC on June 20, 2003, 11:15:24 PM

what mics are you running?

Title: Re:Shockmounts advice
Post by: nickgregory on June 20, 2003, 11:15:38 PM

sound professionals sells the at8415 for this purpose...just run the gooseneck through the rubber bands on the center of the bar...helps to deflect some of the bumps.

Title: Re:Shockmounts advice
Post by: Just Taper Mark from NC on June 20, 2003, 11:19:49 PM

nick
are those the ones i've seen the dpa hypers in,kind of look like the sabrasoms but only one pice per mic?

Title: Re:Shockmounts advice
Post by: nickgregory on June 20, 2003, 11:21:04 PM

similar...not nearly as sturdy as the DPA mount, but at half the price.

Title: Re:Shockmounts advice
Post by: Just Taper Mark from NC on June 20, 2003, 11:29:19 PM

okay, those were the ones I was gonna suggest but wasn't sure if I was thinking right or not.