Become a Site Supporter and Never see Ads again!

Author Topic: AT830?  (Read 1438 times)

0 Members and 1 Guest are viewing this topic.

Offline rsimms3

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1489
AT830?
« on: April 14, 2009, 08:56:37 AM »
Anyone here know anything about these?  There is a guy on eBay with a bunch of them, he sells a lot of communications equipment and if I remember correctly use to sell a bunch of 831s just like these that were terminated in a 1/8" jack.  He says they are much like the 831s except made to handle higher SPLs and have an extra hole in the top of the cap.  Just wondering, my friend is looking to get a cheap set of mics and I like modding so I thought these might be an option.  The information that keeps popping up for 830 is a flat style omni, not a card.  Any information is appreciated.

http://cgi.ebay.com/AT830-Audio-Technica-High-SPL-Cardioid-Condenser-Mic_W0QQitemZ250363910971QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item250363910971&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50
FOR SALE - Check HERE

Offline taperwheeler

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 496
  • Gender: Male
Re: AT830?
« Reply #1 on: April 14, 2009, 12:38:53 PM »
That was the predecessor to the 835's, I believe.  Non removable caps.  It says 'high SPL'...from what I've heard, they need a 4.7k mod.  Maybe they're already modded?
It's also wired into a single 1/8 connector.  You'd hafta have them rewired to run a stereo pair, I assume.
Mics: SP-CMC-8 AT933 Body 4.7K mod AT853 (c, sc) U853 (h) Microline Shotguns
Pres: CA 9100, SP-Preamp
Recorders: MT2 , Tascam DR-07, PCM-M10, PCM A10

 

RSS | Mobile
Page created in 0.06 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF