Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: VX Pocket Question (VX440)  (Read 3870 times)

0 Members and 1 Guest are viewing this topic.

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
VX Pocket Question (VX440)
« on: January 24, 2005, 04:58:11 PM »
Hi all-

having trouble getting my 440 to take a digi input, the analog ins work fine and it plays back fine, but whatever recording program I use (tried wavelab 4.00 c, SF 6, and Vegas 2.0) gives an error when I try to go into the record mode when taking the digi in on the Digigram In #1. I tried an older driver but stilll the same result.

So I was wondering for you VX users out there, is there a way to select specifically which driver is being used? The instructions say that after installing the Digigram software and then installing the WAV driver (add hardware>etc...) that there are WAV, directsound, ASIO (and more?) drivers installed. How do you know which one is being used and how would one change between the various drivers? Hope this makes sense.

Thanks in advance,
Ben


Logged
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline kindms

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5957
    • The Breakfast
Re: VX Pocket Question (VX440)
« Reply #1 on: January 24, 2005, 05:26:10 PM »
My experience has been that the drivers are selected with in the audio program. I always use my digi in on my VX 440 and have never had any issues. When I get home I will fire up my lappy and take a look at what i have selected etc If you haven't gotten any better answers
Logged
AKG c426, AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline kindms

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5957
    • The Breakfast
Re: VX Pocket Question (VX440)
« Reply #2 on: January 24, 2005, 08:49:28 PM »
Ok heres what i have got. In wavelab 5 -> Preferences -. audiocard-> I have selected under Recording "MME -WDM VXPocket 440 In 1" and when I want to select the digital Input I select that in the Digigram Wave Mixer. There is an Analog or Digital source button.

Hope this helps
Logged
AKG c426, AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: VX Pocket Question (VX440)
« Reply #3 on: January 24, 2005, 11:20:56 PM »
thanks for the input.
Logged
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped that are in circulation
Re: VX Pocket Question (VX440)
« Reply #4 on: January 25, 2005, 05:43:59 AM »
u get it working Ben?
Logged

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: VX Pocket Question (VX440)
« Reply #5 on: January 25, 2005, 12:09:57 PM »
still trying ...  :P
Logged
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline mmedley.

  • is on a salty highway burning up a lucky streak
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 6077
  • Gender: Male
  • CAR RAMROD
Re: VX Pocket Question (VX440)
« Reply #6 on: January 25, 2005, 12:52:58 PM »
Make sure that you are selecting the digital input in the vx mixer first then open your recording program and it should be set to VX In 1. That is what I do and it works fine. There should be 2? inputs like a stereo in 1 and stereo in 2 as well? Might try that as well. Also, make sure your windows audio properties are set to record from the vxpocket.

Good Luck!
Logged
I don't know just where I'm going
But I'm gonna try for the kingdom, if I can

Offline Phil

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 557
  • Gender: Male
  • Control for smilers can't be bought
    • BitTorrentMusic.com
Re: VX Pocket Question (VX440)
« Reply #7 on: February 16, 2005, 12:12:42 AM »
Using Wavelab 4.  First go to Start > Settings > Control Pannel > Digigram.  Make sure the input is set to "digital".  Open Wavelab, go into Tools > preferences > Audio Card.  On the LEFT SIDE! choose Digigram ASIO drivers.
Logged
AKG 481 > V3 > MT2496 or VXpocket 440 > Laptop

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: VX Pocket Question (VX440)
« Reply #8 on: May 09, 2005, 02:55:21 PM »
Damn, after spending hours checking every damn setting in the VX window and every f'in setting in my recording software (all of Vegas 2.0, SF 6, and wavelab 4.0c) it turned out that the digi in on my dongle cable was bunk! Ordered a new cable and it works fine. I am happy it is working, and also pissed I spent so much time trying to figure out what the heck was wrong.

Anyway, thanx to fsulloway for helping me troubleshoot this POS and all of you for the suggestions. I guess at least now I know a lot more about the various settings for this soundcard (now that I will probably just pick up a HD recorder in the near future....  ;))    
Logged
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline fsulloway

  • Trade Count: (28)
  • Taperssection All-Star
  • ****
  • Posts: 1765
  • Gender: Male
Re: VX Pocket Question (VX440)
« Reply #9 on: May 10, 2005, 01:47:54 PM »
It was my pleasure Ben. So many folks on this board have helped me figure out the whole laptop taping, wavelab, DVDa thing that it's only right to try and pass on some of that info. You're right about the 440 card, it blows. In fact I've got a V2 card on the way so that I can uses Ian's cable that is so much smaller.
Logged
schoeps ccm4's, mk4v, mk2h, mk41
AKG ck62, ck63, ck61
Nbob/pfa, Naiant/pfa
SD 10T

"Wilmington, North Carolina....Let us hear your motherf***in' pride!" Patterson Hood 12-09-04

"Just About Unwound From Chasing Down The Sound"

Offline tractor

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 129
  • Gender: Male
  • B&K 4022>V2>AD2K
Re: VX Pocket Question (VX440)
« Reply #10 on: May 10, 2005, 06:13:42 PM »
Why get another card Frank, just order a 722 and be done with it  :)
Logged
'Cause where there is love, there is hope

Offline fsulloway

  • Trade Count: (28)
  • Taperssection All-Star
  • ****
  • Posts: 1765
  • Gender: Male
Re: VX Pocket Question (VX440)
« Reply #11 on: May 10, 2005, 07:17:56 PM »
Quote from: tractor on May 10, 2005, 06:13:42 PM
Why get another card Frank, just order a 722 and be done with it  :)

I guess because I prefer 24 bit over 20 bit recordings. :P
Logged
schoeps ccm4's, mk4v, mk2h, mk41
AKG ck62, ck63, ck61
Nbob/pfa, Naiant/pfa
SD 10T

"Wilmington, North Carolina....Let us hear your motherf***in' pride!" Patterson Hood 12-09-04

"Just About Unwound From Chasing Down The Sound"

Offline bkirby

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 768
  • Gender: Male
  • Schoeps/MGs > M148/248 > SD722
Re: VX Pocket Question (VX440)
« Reply #12 on: May 11, 2005, 11:52:05 AM »
Quote from: fsulloway on May 10, 2005, 07:17:56 PM
Quote from: tractor on May 10, 2005, 06:13:42 PM
Why get another card Frank, just order a 722 and be done with it  :)

I guess because I prefer 24 bit over 20 bit recordings. :P

Ouch...

Frank, where can I get another cable for the VX440? I think my cable may be bad as well...
Logged

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: VX Pocket Question (VX440)
« Reply #13 on: May 11, 2005, 12:24:11 PM »
Quote from: bkirby on May 11, 2005, 11:52:05 AM
Quote from: fsulloway on May 10, 2005, 07:17:56 PM
Quote from: tractor on May 10, 2005, 06:13:42 PM
Why get another card Frank, just order a 722 and be done with it  :)

I guess because I prefer 24 bit over 20 bit recordings. :P

Ouch...

Frank, where can I get another cable for the VX440? I think my cable may be bad as well...


I ordered mine from www.audiomidi.com

runs $71 with shipping.

30 day return policy, I believe (I had a bitch of a time with this since I didn't figure out my cable was bunk until after the 30 day period)


Logged
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline Dr.FOB

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 375
  • USM69i
Re: VX Pocket Question (VX440)
« Reply #14 on: May 11, 2005, 12:27:59 PM »
Quote from: BC on May 11, 2005, 12:24:11 PM
Quote from: bkirby on May 11, 2005, 11:52:05 AM
Quote from: fsulloway on May 10, 2005, 07:17:56 PM
Quote from: tractor on May 10, 2005, 06:13:42 PM
Why get another card Frank, just order a 722 and be done with it  :)

I guess because I prefer 24 bit over 20 bit recordings. :P

Ouch...

Frank, where can I get another cable for the VX440? I think my cable may be bad as well...


I ordered mine from www.audiomidi.com

runs $71 with shipping.

30 day return policy, I believe (I had a bitch of a time with this since I didn't figure out my cable was bunk until after the 30 day period)




And here's another place:
http://www.jdsound.com/store/product1.asp?CustomerID=907578&ACBSessionID=hrv2yo4pCeEe64pWinGa&SID=2&Product_ID=3123
Logged
Neumann gear slut
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.071 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF