Become a Site Supporter and Never see Ads again!

Author Topic: M/S Situations?  (Read 6450 times)

0 Members and 1 Guest are viewing this topic.

napa

  • Guest
  • Trade Count: (0)
M/S Situations?
« on: July 25, 2006, 08:23:46 AM »
Is there situations when M/S is not good to run? Such loud indoor venues or anything like that? Any bad experiences?

RebelRebel

  • Guest
  • Trade Count: (0)
Re: M/S Situations?
« Reply #1 on: July 25, 2006, 09:07:34 AM »
Is there situations when M/S is not good to run? Such loud indoor venues or anything like that? Any bad experiences?


M/S is very flexible in that you do a lot with it after the fact..I have had no bad experiences, personally. I use it in situations where I cant use blumlein a lot.

Funny that you ask, a friend of mine is selling a V3 with a M/S modification (switch on the outside) and 10db of extra gain...see the YS//

TEddy

Offline eric.B

  • to the side qualified
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2796
Re: M/S Situations?
« Reply #2 on: July 25, 2006, 09:37:38 AM »
id use MS anywhere EXCEPT from far away from the soundsource.. and like teddy said, anywhere where blumlein is called for, but wouldnt work because of the situation behind on the other side (behind you) the soundsource..  I like MS alot when aptly used..  great staging..

teddy..   why did your friend add 10 db gain to the v3?  there seems like plenty there for most mics and soundsources..
We have a system that increasingly taxes work and subsidizes nonwork.  ~Milton Friedman

Offline Scooter

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1770
  • Gender: Male
Re: M/S Situations?
« Reply #3 on: July 25, 2006, 09:47:37 AM »
i've had a few good pulls lately using M/S slightly FOB at mid size outdoor shows.  i think they came out great!  using both hypers and cards for the M.
MBHO 603a(ka200n/ka500hn) >
R-44, or H120

LMA Recordings

RebelRebel

  • Guest
  • Trade Count: (0)
Re: M/S Situations?
« Reply #4 on: July 25, 2006, 10:44:27 AM »
id use MS anywhere EXCEPT from far away from the soundsource.. and like teddy said, anywhere where blumlein is called for, but wouldnt work because of the situation behind on the other side (behind you) the soundsource..  I like MS alot when aptly used..  great staging..

teddy..   why did your friend add 10 db gain to the v3?  there seems like plenty there for most mics and soundsources..

for ribbon Mics. Ribbons have notoriously low output.

Teddy


Offline §†∑∫åµÞ≥¥

  • You can call me Steve.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 7105
  • Gender: Male
Re: M/S Situations?
« Reply #5 on: July 25, 2006, 10:46:38 AM »
speaking of Mid/Side... I ran my LSD2 in this config a few times over the wknd (outdoor festival). my assumption is/was that since the LSD2 is a stereo mic, there's no post-prod necessary to fine-tune these recordings? does anyone know if they LSD2 takes care of mixing the sound automatically? it exports the sound through one 7-pin cable which splits into to standard xlr's...
"Absurdity is the only reality." - FZ

LMA recordings
www.nutritionbulk.com

Offline fozzy

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3810
  • Gender: Male
  • move along, nothing much to see here
Re: M/S Situations?
« Reply #6 on: July 25, 2006, 10:49:15 AM »
speaking of Mid/Side... I ran my LSD2 in this config a few times over the wknd (outdoor festival). my assumption is/was that since the LSD2 is a stereo mic, there's no post-prod necessary to fine-tune these recordings? does anyone know if they LSD2 takes care of mixing the sound automatically? it exports the sound through one 7-pin cable which splits into to standard xlr's...

LSD2 is basically 2 mics in 1, for M/S you would still need to do the encoding via a pre that does m/s or in post via wavelab/SF/etc...
MK 4V > KCY 250/5 Ig (KS 10I)  > VST62IUg > 722

Offline §†∑∫åµÞ≥¥

  • You can call me Steve.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 7105
  • Gender: Male
Re: M/S Situations?
« Reply #7 on: July 25, 2006, 10:51:06 AM »
speaking of Mid/Side... I ran my LSD2 in this config a few times over the wknd (outdoor festival). my assumption is/was that since the LSD2 is a stereo mic, there's no post-prod necessary to fine-tune these recordings? does anyone know if they LSD2 takes care of mixing the sound automatically? it exports the sound through one 7-pin cable which splits into to standard xlr's...

[snip] or in post via wavelab/SF/etc...

is there an explanation on how to do this somewhere that anyone knows of? yes, I know I'm being lazy... just thought I'd ask first. ;D
"Absurdity is the only reality." - FZ

LMA recordings
www.nutritionbulk.com

RebelRebel

  • Guest
  • Trade Count: (0)
Re: M/S Situations?
« Reply #8 on: July 25, 2006, 10:53:25 AM »
speaking of Mid/Side... I ran my LSD2 in this config a few times over the wknd (outdoor festival). my assumption is/was that since the LSD2 is a stereo mic, there's no post-prod necessary to fine-tune these recordings? does anyone know if they LSD2 takes care of mixing the sound automatically? it exports the sound through one 7-pin cable which splits into to standard xlr's...

you take the "side" part of the recording, and flip the phase..one "side" panned L, one "side"(with flipped phase) panned R..use a M/S encoder(such as waves S1) to adjust the image..






« Last Edit: July 25, 2006, 10:55:29 AM by Teddy »

Offline §†∑∫åµÞ≥¥

  • You can call me Steve.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 7105
  • Gender: Male
Re: M/S Situations?
« Reply #9 on: July 25, 2006, 11:00:03 AM »
speaking of Mid/Side... I ran my LSD2 in this config a few times over the wknd (outdoor festival). my assumption is/was that since the LSD2 is a stereo mic, there's no post-prod necessary to fine-tune these recordings? does anyone know if they LSD2 takes care of mixing the sound automatically? it exports the sound through one 7-pin cable which splits into to standard xlr's...

you take the "side" part of the recording, and flip the phase..one "side" panned L, one "side"(with flipped phase) panned R..use a M/S encoder(such as waves S1) to adjust the image..

uh oh... it sounds like I should've ran stacked omni's or blumlein instead! ;D :-\ :-X :P


post 5000!!  :spin:
"Absurdity is the only reality." - FZ

LMA recordings
www.nutritionbulk.com

RebelRebel

  • Guest
  • Trade Count: (0)
Re: M/S Situations?
« Reply #10 on: July 25, 2006, 11:25:30 AM »
It isnt hard, there should be a phase flip option on your editing software...you dont have to use the MS encoder...you can also link the two "side" channels" and adjust them together(linked mode) to get the desired image.


speaking of Mid/Side... I ran my LSD2 in this config a few times over the wknd (outdoor festival). my assumption is/was that since the LSD2 is a stereo mic, there's no post-prod necessary to fine-tune these recordings? does anyone know if they LSD2 takes care of mixing the sound automatically? it exports the sound through one 7-pin cable which splits into to standard xlr's...

you take the "side" part of the recording, and flip the phase..one "side" panned L, one "side"(with flipped phase) panned R..use a M/S encoder(such as waves S1) to adjust the image..

uh oh... it sounds like I should've ran stacked omni's or blumlein instead! ;D :-\ :-X :P


post 5000!!  :spin:

napa

  • Guest
  • Trade Count: (0)
Re: M/S Situations?
« Reply #11 on: July 25, 2006, 12:25:28 PM »
i've had a few good pulls lately using M/S slightly FOB at mid size outdoor shows.  i think they came out great!  using both hypers and cards for the M.

Inside venues?

Offline Scooter

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1770
  • Gender: Male
Re: M/S Situations?
« Reply #12 on: July 25, 2006, 12:38:43 PM »
i have only run M/S onstage inside.  but again, turned out great.
MBHO 603a(ka200n/ka500hn) >
R-44, or H120

LMA Recordings

napa

  • Guest
  • Trade Count: (0)
Re: M/S Situations?
« Reply #13 on: July 25, 2006, 03:35:04 PM »
id use MS anywhere EXCEPT from far away from the soundsource.. and like teddy said, anywhere where blumlein is called for, but wouldnt work because of the situation behind on the other side (behind you) the soundsource..  I like MS alot when aptly used..  great staging..

teddy..   why did your friend add 10 db gain to the v3?  there seems like plenty there for most mics and soundsources..

What's a good distance?

Offline rowjimmy

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2175
  • Gender: Male
  • rowjimmy.com
    • Row Knows
Re: M/S Situations?
« Reply #14 on: July 26, 2006, 03:23:42 PM »
id use MS anywhere EXCEPT from far away from the soundsource.. and like teddy said, anywhere where blumlein is called for, but wouldnt work because of the situation behind on the other side (behind you) the soundsource..  I like MS alot when aptly used..  great staging..

teddy..   why did your friend add 10 db gain to the v3?  there seems like plenty there for most mics and soundsources..

for ribbon Mics. Ribbons have notoriously low output.

Teddy



 :drool: nice :drool:
Bandcamp | Host of The Brokedown Podcast
mic > wires > recorder

Offline JasonR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 803
  • Gender: Male
  • Schoepsoholic
Re: M/S Situations?
« Reply #15 on: July 26, 2006, 03:29:53 PM »
Think of M-S like X-Y (coincident pair of directional microphones) with the ability to adjust the included angle in post.  The same rules apply.  M-S, like X-Y, has excellent mono compatibility which is helpful for anything that might end up broadcast on radio, or mixed with a mono feed like a mono SBD signal.

- Jason
Schoeps MK21,MK4,MK41,MK41V,MK8 > CMC5/Naiant Tinybox/PFAs > Sound Devices 744T, Sony PCM-M10
DPA 4060 (CS HEB) > SD 744T, M10

Offline CQBert

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1157
  • Gender: Male
  • Sunset in Zilker Park
Re: M/S Situations?
« Reply #16 on: July 27, 2006, 11:31:04 AM »
I like to run M/S at a small local venue and I am approx 10 ft from the stage and 8-9 ft up in the air.  The results have been great but to be fair I really like split omni from there a little better...the crowds are usually very quiet and the recordings extremely clear.

CQBert
Sennheiser MKH 8040 (Matched) > Sound Devices 702

Offline BWolf

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5965
  • Gender: Male
  • Always on the prowl...
    • Etree Trading List
Re: M/S Situations?
« Reply #17 on: July 27, 2006, 04:39:52 PM »
i've had a few good pulls lately using M/S slightly FOB at mid size outdoor shows.  i think they came out great!  using both hypers and cards for the M.

Inside venues?

I've run it inside and outside.  Mixed both on the fly and in post.  Here are the few pointers that I'd give to someone whos never played with it.  Do it in post to start with.  That'll give you a good idea when you run on the fly about the mix you like.  I would start with 50/50 (that is the same gain on both the mid and the side) and move from there.  I usually go with a tad more mid then side, but it depends on the place.  Outside usually calls for a little more mid, especailly because you are a little further back.  I wouldn't really try more side then mid outside, but to each his own.  I was extremely close at moe. acoustic for bonnaroo and was running them about 3 db from each other with the mid a little higher then the side.

For inside, I would also suggest starting at 50/50, but then play with it to your liking.  Bring some headphones.  Depending on how close you are, a touch more mid might be nice. 

Remember, if you don't want to mix on the fly, it keeps the sound very open to whatever you want to do.  In post, you can make your recording sound like cards, hypers, or mono, and have as much depth as you could possibly need.  I really really like M/S and have had nothing but good results with it.  Its incredible what you can do with it in post if you record the mid and side to separate chanels, makes it so versitile and really opens the soundstage.
"The best jazz is funky, and the best funk is jazzy" -SMOOTH
------------------------------------------------------
Neumann AK20/AK40s > LC3 > KM100 > Lunatec V3 (MS mod) > SD 722 or Microtrack 24/96  (Hi-Ho Silver Custom Interconnects)
------------------------------------------------------

Offline Scooter

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1770
  • Gender: Male
Re: M/S Situations?
« Reply #18 on: July 27, 2006, 04:57:11 PM »
yeah, i usually end up with the S about 3-6dB lower than the M.  I love being able to matrix in post! ;D  ...and nobody wants to patch!
« Last Edit: July 27, 2006, 05:01:23 PM by Scooter »
MBHO 603a(ka200n/ka500hn) >
R-44, or H120

LMA Recordings

Offline §†∑∫åµÞ≥¥

  • You can call me Steve.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 7105
  • Gender: Male
Re: M/S Situations?
« Reply #19 on: July 27, 2006, 10:18:53 PM »
It isnt hard, there should be a phase flip option on your editing software...you dont have to use the MS encoder...you can also link the two "side" channels" and adjust them together(linked mode) to get the desired image.

out of curiousity, won't this create three separate channels/tracks? the Left, the Center and the Right? how do I mix it all together? I'm using WaveLab (but am a major novice) and also have Audacity.
"Absurdity is the only reality." - FZ

LMA recordings
www.nutritionbulk.com

Offline BWolf

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5965
  • Gender: Male
  • Always on the prowl...
    • Etree Trading List
Re: M/S Situations?
« Reply #20 on: July 28, 2006, 12:03:33 AM »
It isnt hard, there should be a phase flip option on your editing software...you dont have to use the MS encoder...you can also link the two "side" channels" and adjust them together(linked mode) to get the desired image.

out of curiousity, won't this create three separate channels/tracks? the Left, the Center and the Right? how do I mix it all together? I'm using WaveLab (but am a major novice) and also have Audacity.

If you record with two separate channels, you will get a mid and a side (left and right).  then in post, you make the L = M + S and R = M - S.  This is intuitive if you look at the wave form.  The figure 8 capsule will be positive for sounds on the left, and negative for sounds on the right.  So the R = M - (-S) = M + S, but because the right side sounds will be negative, you need to "flip" the phase (which is what the plugin will do).

In wavelab, there is a plugin for the mixing down to stereo.  So on the right, in the effects, click on the right side of one of the effect option slots.  Go to the "VST" menu and find the one called "toolsone".  You will be able to invert the right and click on MS process.  Play with the control till it sounds like you want it.  Then you'll have to set up a batch process for the wave, and choose the "toolsone" plugin for the batch and make the settings the same as the way you liked them.  Let the batch run, and you'll have a new wave file with a L and R chanel that is the matrix of the mid and side. 

Hope this helps.

BW
"The best jazz is funky, and the best funk is jazzy" -SMOOTH
------------------------------------------------------
Neumann AK20/AK40s > LC3 > KM100 > Lunatec V3 (MS mod) > SD 722 or Microtrack 24/96  (Hi-Ho Silver Custom Interconnects)
------------------------------------------------------

Offline ghellquist

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 477
  • Gender: Male
Re: M/S Situations?
« Reply #21 on: July 28, 2006, 04:17:43 AM »
There is a free plugin at the Voxengo site, called MSED, that does the matrixing for you in one plugin. Simply place it in your DAW application. Be warned though that default setting is pass-thru so you need to switch settings. Really simple to use and with good results.

Gunnar

RebelRebel

  • Guest
  • Trade Count: (0)
Re: M/S Situations?
« Reply #22 on: July 28, 2006, 04:50:38 AM »
Yes, you will have 3 tracks. you use the audio montage feature in wavelab to mix them.


It isnt hard, there should be a phase flip option on your editing software...you dont have to use the MS encoder...you can also link the two "side" channels" and adjust them together(linked mode) to get the desired image.

out of curiousity, won't this create three separate channels/tracks? the Left, the Center and the Right? how do I mix it all together? I'm using WaveLab (but am a major novice) and also have Audacity.

 

RSS | Mobile
Page created in 0.131 seconds with 47 queries.
© 2002-2024 Taperssection.com
Powered by SMF