Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: jsteinthal on December 31, 2019, 03:11:33 PM

Title: Powering a Grace Lunatec V2
Post by: jsteinthal on December 31, 2019, 03:11:33 PM

Happy holidays

Anyone have advice on powering a v2?

Title: Re: Powering a Grace Lunatec V2
Post by: jerryfreak on December 31, 2019, 05:37:44 PM

It’s pretty flexible there’s tons of ways to do it from the old SLA bricks to the modern DVD batteries. it only needs 6V so there’s lots of options from selectable voltage dvd batteries to fixed voltage 7.4V li-ion packs

Title: Re: Powering a Grace Lunatec V2
Post by: perks on December 31, 2019, 07:31:54 PM

plus you need a 4 pin XLR to connect the V2 to the battery.

Title: Re: Powering a Grace Lunatec V2
Post by: jerryfreak on December 31, 2019, 07:32:56 PM

i have a bunch of old cables i can see if i have a 4-pin lying around

Title: Re: Powering a Grace Lunatec V2
Post by: pohaku on December 31, 2019, 07:41:00 PM

Ted can make you a power cable if you need one.  I use Talentcell batteries with mine.

Title: Re: Powering a Grace Lunatec V2
Post by: Chilly Brioschi on January 06, 2020, 10:46:26 PM

Very difficult to power, sell it to me.    8)