Become a Site Supporter and Never see Ads again!

Author Topic: iriver H1xx Tapers FAQ (beta)  (Read 102509 times)

0 Members and 1 Guest are viewing this topic.

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3591
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: iriver H1xx Tapers FAQ (beta)
« Reply #285 on: September 18, 2006, 09:28:15 PM »
I got my first SBD pull ......

What exactly is a "pull"?

Can women do it too? or is it a man thing?

Offline kuuan

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 243
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #286 on: September 18, 2006, 11:54:59 PM »
I just wanted everyone to know that the iSkin is still on sale for 5.99USD.  This is the best cover for your iRiver out there IMO.  I have 3 iRivers and all of them have iSkins on them.

http://www.iskin.com/store/I2shop_irvr1XX.tpl

Size A = H120
Size B = H140

if shipping cost to Europe would not be 15,55, making a total of 21.54.....
Everything you do through out the day, every thought and every feeling leaves an impression stored inside you.
These impressions create tendencies, their sum total is your character.
gear: SP-CMC8+AT853 cards+omnis, AT822>DIY preamp>iRiverH120rockboxed

Offline MarkF

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 587
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #287 on: September 19, 2006, 12:26:41 AM »
I just wanted everyone to know that the iSkin is still on sale for 5.99USD.  This is the best cover for your iRiver out there IMO.  I have 3 iRivers and all of them have iSkins on them.

http://www.iskin.com/store/I2shop_irvr1XX.tpl

Size A = H120
Size B = H140

if shipping cost to Europe would not be 15,55, making a total of 21.54.....

Yeah, but they used to be 24.99 + shipping.  :o
open: SP C-4 > Bumblebee MiAGi-II Silver Cables > UA5 (T+ mod)> H120/JB3

not so open: Church Audio Cardoid mics > ST-9100 preamp > H120

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #288 on: September 19, 2006, 08:59:47 AM »
any suggestions which manual gain setings to use for my 1st iriver h120 stealth-session next monday in vienna with rockbox-firmware...latest build?

it´s a pearl jam concert in a big indoor arena.

i use sp-cmc-8 cardioid mics and a 9V-mm-mint-box with 7 bass-roll-off options on the iriver´s line-in.

i have absolutley no idea which gain-setting would be safe for loud rock concerts as I´m used to minidisc line-in recordings where the optimum was at 12-13 of 30 on the scale ;) !

thx in advance
arni from vienna
« Last Edit: September 19, 2006, 09:02:25 AM by Arni99 »
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline whatboutbob

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 549
  • A very happy chappy right now...
Re: iriver H1xx Tapers FAQ (beta)
« Reply #289 on: September 20, 2006, 05:42:27 AM »
i have absolutley no idea which gain-setting would be safe for loud rock concerts as I´m used to minidisc line-in recordings where the optimum was at 12-13 of 30 on the scale ;) !

Isn't that what Tarantula Ad are for? :)

Keep your remote plugged in for them and sneak peaks at the levels during the loudest parts of the show and adjust accordingly.  Err on the side of too low.  Once you clip it can't be repaired, but you can always boost afterwards.

edit: btw...just wanted to say...that I am so smart...s, m, r, t.  I'm now the proud owner of a H160...after i bought a 60 gig drive off ebay for less than $50 and swapped it into my h140.
« Last Edit: September 20, 2006, 05:47:22 AM by whatboutbob »
Mics: Audix m1290's, AT943's (w/ AT853 C/O/H caps), AT853's
Power: PS-2, Homebrew 3wbb, SPSB-6
Pre/AD: UA-5 (BM2p+), CA-9100, AD-20
Recorder: iriver H120, H160

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #290 on: September 20, 2006, 07:12:27 AM »
i got my ih120 without remote ;).
is the remote-clicking issue solved yet with the latest builds?
thx
arni
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline Gawain

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 222
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #291 on: September 20, 2006, 08:49:40 AM »
edit: btw...just wanted to say...that I am so smart...s, m, r, t.  I'm now the proud owner of a H160...after i bought a 60 gig drive off ebay for less than $50 and swapped it into my h140.
whatboutbob, who sells them on Ebay? I would like to have a 2nd unit with 60 GB and a long life battery! (also tips for battery sellers will be appreciated :))

Offline whatboutbob

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 549
  • A very happy chappy right now...
Re: iriver H1xx Tapers FAQ (beta)
« Reply #292 on: September 20, 2006, 09:27:45 AM »
edit: btw...just wanted to say...that I am so smart...s, m, r, t.  I'm now the proud owner of a H160...after i bought a 60 gig drive off ebay for less than $50 and swapped it into my h140.
whatboutbob, who sells them on Ebay? I would like to have a 2nd unit with 60 GB and a long life battery! (also tips for battery sellers will be appreciated :))

If you're after a 60gig hdd that will work/fit in the h140:

http://search.ebay.com/search/search.dll?from=R40&satitle=MK6006GAH

I won one of bidtosucceed's 'not tested' auctions (she's got a couple up there atm...one that's ending in 12 hours)...the drive works flawlessly...ymmv.

For batteries...ermm...i bought mine out of hong kong...they all seem much of a muchness...just search for model # UP3253854H i guess...
Mics: Audix m1290's, AT943's (w/ AT853 C/O/H caps), AT853's
Power: PS-2, Homebrew 3wbb, SPSB-6
Pre/AD: UA-5 (BM2p+), CA-9100, AD-20
Recorder: iriver H120, H160

Offline Gawain

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 222
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #293 on: September 20, 2006, 02:19:09 PM »
nice, thanks a lot  :) the new ones are so expensive, better take the risk with a 'not tested' one, the price is good  ;D

will it work with an h120 aswell?

the batteries are the ones from iPod 2nd gen, right?

Offline cgrooves

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 804
  • Gender: Male
  • Get On the Bus -Busman Audio
Re: iriver H1xx Tapers FAQ (beta)
« Reply #294 on: September 20, 2006, 02:26:49 PM »
nice, thanks a lot  :) the new ones are so expensive, better take the risk with a 'not tested' one, the price is good  ;D

will it work with an h120 aswell?

the batteries are the ones from iPod 2nd gen, right?

I believe the hardrive in the h140 is a 'double platter' and the one in the h120 is a single (that's why the dimesions are different between the h120 & h140).  Based on that information, I don't believe that the 60 gig would fit in the h120.  That is purely speculation, and maybe whatboutbob or someone else can clarify.

The batteries are from the 1st & 2nd gen iPods.  I believe most people are upgrading to the 2200maH from the stock battery.
AUDIO:
Open:  Busman Audio BSC1-(K1/K2/K3/K4) > Fostex FR-2LE (Busman T Mod) 
                       
Unopen:  AudioReality Omni Mics (Panasonic capsules)> AudioReality Battery Box (depending on SPL's) > iRiver H140 w/ Rockbox

VISUAL:
Canon 7D, Canon 50mm/1.8, Canon 85mm/1.8, Tamron 17-50mm/2.8, Tamron 70-200mm/2.8

Offline Gawain

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 222
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #295 on: September 20, 2006, 02:47:32 PM »
yep, that's why I asked, I was almost sure the 140 is slightly bigger...

about the batteries: the model number doesn't include an "A" between the "5" and the "4"?? that's what I've found searching on Ebay...

cgrooves, what times you get with the 2200 ones? I get almost the 16 'normal' hours playing and something around 8 recording (or maybe more, haven't checked it in detail) with the stock battery on my h120

Offline cgrooves

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 804
  • Gender: Male
  • Get On the Bus -Busman Audio
Re: iriver H1xx Tapers FAQ (beta)
« Reply #296 on: September 20, 2006, 02:58:56 PM »
cgrooves, what times you get with the 2200 ones? I get almost the 16 'normal' hours playing and something around 8 recording (or maybe more, haven't checked it in detail) with the stock battery on my h120

My 2200 hasn't arrived yet.  My stock battery hasn't let me down, but I can tell that it has some age.  My stock battery is giving me approx. 10hrs playback & 5 hours recording, so I'm upgrading.  Not really necessary, but with a 2200mah replacement for $20 shipped how can you go wrong?
AUDIO:
Open:  Busman Audio BSC1-(K1/K2/K3/K4) > Fostex FR-2LE (Busman T Mod) 
                       
Unopen:  AudioReality Omni Mics (Panasonic capsules)> AudioReality Battery Box (depending on SPL's) > iRiver H140 w/ Rockbox

VISUAL:
Canon 7D, Canon 50mm/1.8, Canon 85mm/1.8, Tamron 17-50mm/2.8, Tamron 70-200mm/2.8

Offline hyperplane

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 371
Re: iriver H1xx Tapers FAQ (beta)
« Reply #297 on: September 20, 2006, 04:20:51 PM »
FWIW, with the 2200 mah battery upgrade, I get at least 12 hours, and have gotten up to 14 hours, of record time. Playback is somewhere between 24 and 30 hours per charge, for my h140.

For those doing the battery upgrade, just take your time. There are some small plastic pieces that sometimes want to "jump out" of the iriver.  ;D   And like I've said before, i found it easier to swap the molex connectors (take the one off the original iriver battery and put it on the 2200 mah upgrade battery); that was easier for me than shaving off a piece of the molex connector on the 2200 mah battery. Oh, and be sure to get the polarity of the wires correct as well.

Hail to the hackers.

Offline Gawain

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 222
  • Gender: Male
Re: iriver H1xx Tapers FAQ (beta)
« Reply #298 on: September 20, 2006, 04:46:27 PM »
wow, 12 hours of record time cover a whole festival (12 bands, 1 hour each...that's more than I'm interested in at any festival  :)). And the playback time is fantastic too!! thanks, hyperplane  :)
About do it myself...ufff, that's more difficult, I'm sure I will lost all those little plastic pieces and screw every connector  ;D And your idea is much better than shave off pieces!

Just need to find a cheap unit off Ebay with all working except the HD, I won't touch my working new h120 ;)

And sure, cgrooves, maybe we don't need it (well, you a bit, your unit has lost some, though is enough anyway), but who can resist upgrading the battery for $20?  :)

Offline hyperplane

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 371
Re: iriver H1xx Tapers FAQ (beta)
« Reply #299 on: September 20, 2006, 07:07:53 PM »
It is sweet battery life.

The other day I decided to go to a local show on a whim. My iriver only had 25% of its battery charge (I have my battery life displayed as a percentile, vs. the icon/picture to display current battery life). I recorded 3 hours (opening band + main act) and still had 10% charge remaining after the show was over.

 

RSS | Mobile
Page created in 0.094 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF