Become a Site Supporter and Never see Ads again!

Author Topic: Speaker Baffles  (Read 6465 times)

0 Members and 1 Guest are viewing this topic.

Offline Scooter123

  • "I am not an alcoholic. I am a drunk. Drunks don't go to meetings."
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3914
Speaker Baffles
« on: November 24, 2022, 06:35:51 AM »
I'm an avid woodworker and am building a set of speakers for a friend.  We haven't figured out whether they should be full range drivers or two ways with a cross-over yet.  My question is about baffles.  There seems to be two schools of thought on this with one side opting for internal wooden baffles, usually made out of 1/2" mdf and another school of thought opting for plastic and foam baffles which cover the rear of the driver/speaker to cancel out phasing. 

I will honestly admit my ignorance on this subject and wondering what the folks here who are smarter than me on the subject have to say about baffles and their design in the case of a single driver or dual driver speaker. 
Regards,
Scooter123

mk41 > N Box  > Sony M-10
mk4 > N Box > Sony M-10

Offline Chilly Brioschi

  • Get out, see live music !
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 15704
  • Gender: Male
  • Waiting for the next cladogenetic event, or Godot
    • Oceana North America
Re: Speaker Baffles
« Reply #1 on: December 08, 2022, 06:03:38 AM »
There's also sealed box enclosure, no baffles
Less efficient, especially if box is small
https://eminence.com/blogs/blog/sealed-vs-ported-enclosures

Dynakit split the difference and used acoustic insulation to dampen their ports, allowing for bigger opening(resonance) and restricted air passage
 
Good luck !

"Peace is for everyone"
        - Norah Jones

"Music is the drug that won't kill you"
         - Fran Lebowitz

WAGE PEACE

Offline Chilly Brioschi

  • Get out, see live music !
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 15704
  • Gender: Male
  • Waiting for the next cladogenetic event, or Godot
    • Oceana North America
Re: Speaker Baffles
« Reply #2 on: January 18, 2023, 05:01:17 AM »
Did you get cabs together?
"Peace is for everyone"
        - Norah Jones

"Music is the drug that won't kill you"
         - Fran Lebowitz

WAGE PEACE

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 16054
  • Gender: Male
  • We create auditory illusions, not reproductions
Re: Speaker Baffles
« Reply #3 on: January 18, 2023, 09:33:00 AM »
Coming late to the party to give Clem a ride home..

The internal baffles in a loudspeaker can server a couple purposes.  The most common is stiffening the box to attenuate major panel resonances and force the remaining resonances to higher frequencies, preferably outside of the most sensitive hearing range.  The BBC school of speaker design goes the opposite way, using relatively thin cabinet walls not extensively braced but instead heavily damped with bitumen or something similar, driving resonances lower instead of higher. In either case, the front face baffle to which the drivers are fastened is preferably thick and solid.

Another purpose can be to create separate internal spaces for different drivers in a multi-driver speaker, isolating them so that the back pressure from one driver doesn't intermodulate the movement of another.  That's not necessary if one of the two drivers features a sealed back chamber, which is common with tweeters and sometimes midranges.  And is obviously not necessary with a single driver speaker.

musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

 

RSS | Mobile
Page created in 0.035 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF