Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: KLowe on November 21, 2006, 11:05:34 PM
-
Hello,
does anyone know where to buy the toslink output peice for the UA-5. Mine is screwed up and needs to be replaced. Looks like a "simple" solder job but I can't find the part number anywhere and digikey.com does not have pictures of thier products >:(
I also want to "opti-mod" the DMIC-20
Thanks for any help.
Kevin
-
http://dkc3.digikey.com/PDF/T063/0233.pdf (http://dkc3.digikey.com/PDF/T063/0233.pdf)
Found it.
Also found the replacement optical out for the JB3 incase anyone has a broken one. Since this has all of the pins explained...It shouldn't be that hard to go SPDIF - RCA in to the JB3??
-
I'm confused. I get the first post about replacing the UA5 toslink output connector. But...
Also found the replacement optical out for the JB3 incase anyone has a broken one. Since this has all of the pins explained...It shouldn't be that hard to go SPDIF - RCA in to the JB3??
The JB3 doesn't have an optical output. Are you also trying to replace the JB3 mini optical S/PDIF input? Or change it to coax RCA S/PDIF? Or...something else?
-
yeah.... typo. I meant optical input to JB3. I'm not actually doing anything with the JB3 I just found that part for it incase anyone was looking for one.
The optical to RCA on the JB3 was just a passing thought to elimate the use of optical cables to transfer the digital signal. After many cable movement clicks etc... I personally hate optical in the field. Just a thought.
-
thats a pretty cool thought...
If i had any skills at all with a soldering iron... or building electronics. I'd look for another jb3 so as to create the first coax-mod jb3.
I suspect that the easiest only way to do this mod would be to eliminate the analog line-in.