Hey guys I hope this is in the correct forum as I am asking for help and not specifics of the device. Anyway I had planned on taping at the Xmas Jam, and it has been a while since i'd set up my rig. Since I layed out of work sick today I figured it was a great chance to test everything out. Well i set everything up, turned the Phantom power on my UA5, popped on my headphones and the left channel was "gone." After playing around with the level knob i found that it would spin completely around in both directions with no stopping point. Upon further investigation and some snaps of the fingers in front of the left mic I found that the channel wasn't dead it was simply at a very low volume. So I broke open the case to see what I could see and low and behold the level knob fell off and the little blue component that the knob hooks into was broken in half. I don't know how this happened or when. Could be bad storage on my part or it could have been damaged at the last show i recorded. Anyway I've included some pics to give you an idea of the parts I'm speaking of and any help would be great.