Become a Site Supporter and Never see Ads again!

Author Topic: DAT Long Play 12 bit/32 kHz transfers  (Read 12173 times)

0 Members and 1 Guest are viewing this topic.

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 356
  • Sverige/Sweden/Suède
DAT Long Play 12 bit/32 kHz transfers
« on: September 27, 2020, 03:33:36 PM »
I have never been a DAT guy myself so I have zero experience using these machines. I've decided to get one in my arsenal strictly for transfers. What are the most versitile machines out there? I need one that sounds nice and can play any tape I put in it. Long play recordings included. As I won't use it regurarely I would prefer the range $200-600. If you can recommend any EU sellers that would be nice too.

It's really difficult to find DAT recorders in Sweden. There is a Sony DTC-57ES for sale now but to my knowledge it's a consumer level DAT recorder and it can't play 44,1 kHz? Would it be good enough for me or should I look elsewhere?
« Last Edit: October 18, 2020, 04:37:46 PM by TheMetalist »
"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline Len Moskowitz (Core Sound)

  • Site Supporter
  • Trade Count: (3)
  • Taperssection Member
  • *
  • Posts: 381
    • Core Sound
Re: DAT recorder for transfers
« Reply #1 on: September 27, 2020, 03:37:14 PM »
Panasonic/Technics SV-3700 or SV-3900.
Len Moskowitz
Core Sound
www.core-sound.com

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 356
  • Sverige/Sweden/Suède
Re: DAT recorder for transfers
« Reply #2 on: September 27, 2020, 03:43:45 PM »
Panasonic/Technics SV-3700 or SV-3900.

Can they play LP recorded tapes?

Edit: The reason for this is that I will likely help a guy transfer some shows unfortunately recorded in Long Play.
« Last Edit: September 27, 2020, 04:43:50 PM by TheMetalist »
"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DAT recorder for transfers
« Reply #3 on: September 27, 2020, 05:11:41 PM »
Easier to find 32K long play support on the DAT side than on the recorder side, depending on what you’re transferring it to. I have one to transfer and i have to bust out an old sound card setup because none of my standalone devices record 32K.
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 356
  • Sverige/Sweden/Suède
Re: DAT recorder for transfers
« Reply #4 on: September 27, 2020, 05:22:32 PM »
Easier to find 32K long play support on the DAT side than on the recorder side, depending on what you’re transferring it to. I have one to transfer and i have to bust out an old sound card setup because none of my standalone devices record 32K.

I noob question perhaps but is it impossible to convert it in post?
"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DAT recorder for transfers
« Reply #5 on: September 27, 2020, 05:35:19 PM »
It will absolutely get sample rate converted in post, in hq in software. I just don’t want to rely on the built-in dac chip on a 25-year-old deck.
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline Scooter123

  • "I am not an alcoholic. I am a drunk. Drunks don't go to meetings."
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3763
Re: DAT recorder for transfers
« Reply #6 on: September 27, 2020, 06:15:04 PM »
Sony 7030 or 7040 (newer version) were the top of line DAT machines in the history of that medium.  I have both.  There is no appreciable difference between the two, except the 7040 had remote capabilities.  I don't believe the electronics are different under the skin.  These machines were rack mounted beasts that weighed in at about 50 pounds and had a killer transport system.  They retailed for $10,000 in the day. 

I transcribed (converted) somewhere near 1,000 shows for a radio station  five years ago using these machines. 

The output is weird, only a single XLR for digital out, no SPDIF or Sony 7 Pin, so I think I had to use a HOSA AES Box to convert that signal to SPDIF, thence into a Tascam DR680.     
« Last Edit: September 27, 2020, 06:33:10 PM by Scooter123 »
Regards,
Scooter123

mk41 > N Box  > Sony M-10
mk4 > N Box > Sony M-10

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: DAT recorder for transfers
« Reply #7 on: September 27, 2020, 07:37:58 PM »
Now that Paul is gone, where do we go to get decks serviced?
once again, lost in all the noise

Offline Scooter123

  • "I am not an alcoholic. I am a drunk. Drunks don't go to meetings."
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3763
Re: DAT recorder for transfers
« Reply #8 on: September 27, 2020, 07:49:37 PM »
Where are you located?  I have a place in North Hollywood, California for this type of deck.  They are not cheap.  $100 minimum usually and most repairs are less than $150
Regards,
Scooter123

mk41 > N Box  > Sony M-10
mk4 > N Box > Sony M-10

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 356
  • Sverige/Sweden/Suède
Re: DAT recorder for transfers
« Reply #9 on: September 28, 2020, 03:29:41 AM »
Sony 7030 or 7040 (newer version) were the top of line DAT machines in the history of that medium.  I have both.  There is no appreciable difference between the two, except the 7040 had remote capabilities.  I don't believe the electronics are different under the skin.  These machines were rack mounted beasts that weighed in at about 50 pounds and had a killer transport system.  They retailed for $10,000 in the day. 

I transcribed (converted) somewhere near 1,000 shows for a radio station  five years ago using these machines. 

The output is weird, only a single XLR for digital out, no SPDIF or Sony 7 Pin, so I think I had to use a HOSA AES Box to convert that signal to SPDIF, thence into a Tascam DR680.   

Seems like great machines but unfortunately they can't play LP recordings.
"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DAT recorder for transfers
« Reply #10 on: September 28, 2020, 03:35:18 AM »
how many do you have to transfer? i can roll them for you
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 356
  • Sverige/Sweden/Suède
Re: DAT recorder for transfers
« Reply #11 on: September 28, 2020, 05:02:56 AM »
how many do you have to transfer? i can roll them for you
Thanks but this is just for fun. I'm interested to learn more about DAT and possibly help some friends with their tapes along the way.
"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5944
Re: DAT recorder for transfers
« Reply #12 on: September 28, 2020, 09:55:47 AM »
Panasonic/Technics SV-3700 or SV-3900.
I suggest AVOIDING the SV3700.
Too many plastic parts.
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: DAT recorder for transfers
« Reply #13 on: September 28, 2020, 10:02:18 AM »
Where are you located?  I have a place in North Hollywood, California for this type of deck.  They are not cheap.  $100 minimum usually and most repairs are less than $150

I'm trapped in the hell that is SLC. You can't even get a cassette player serviced here without a 7 month wait.
once again, lost in all the noise

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: DAT recorder for transfers
« Reply #14 on: September 28, 2020, 11:04:14 AM »
Now that Paul is gone, where do we go to get decks serviced?

This...  I have a R500 I want to have serviced...

Terry
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

 

RSS | Mobile
Page created in 0.077 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF