Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: willndmb on February 29, 2008, 08:41:55 AM
-
i just got a smart charger and rc battery pack
the charger has 1.0 and 2.0 as choices for charging but there is no directions as to what each is for
can someone tell me which to use?
thanks
-
I'm looking into these for my fr-2le as well. I ran out of batt. power Monday night with AA rechargeables. I copied this from an abay add from all-batteries I think. It looks like the higher amp charging is for the higher mAh batts. I'm sure your batteries are over 2000mAh so I would guess you would charge at 2A. I hope this helps.
SMART UNIVERDSAL CHARGER
Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
Universal for for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack)
Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours.
Charging Current 0.9A for battery packs with capacity from 1100mAh - 2200mAh. For 2000mAh pack, charging time is 1 hour.
Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.Smart Charger: with automatic votlage detection[/font]Use pulse and ngative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
Red LED will be on during charging.
Automatically charging ending with negative delta V.
Worldwide usage with 120-240V AC
Safety protection fuse for over current, short circuit & reverse polarity protection.
-
thanks
figures because i just charged 3500 at 1a
oh well