Become a Site Supporter and Never see Ads again!

Author Topic: Audio Technica 943 with R09 - Help!!  (Read 1843 times)

0 Members and 1 Guest are viewing this topic.

Offline keekade

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 9
Audio Technica 943 with R09 - Help!!
« on: April 09, 2008, 07:37:03 PM »
I have an Edirol R09.  I ordered AT943C mics (lapel) because I thought the R09 had true phantom power.  I have since found out they do not.  Unfortunately, I cannot change my order.   Can I get a battery module to work the 943's with the R09?    What battery module would work the best.  Thanks so much!

Keekade

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: Audio Technica 943 with R09 - Help!!
« Reply #1 on: April 09, 2008, 07:51:02 PM »
Check Soundprofessionals.com.  They have plenty of battery boxes to choose from.
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline keekade

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 9
Re: Audio Technica 943 with R09 - Help!!
« Reply #2 on: April 10, 2008, 11:24:07 PM »
Many thanks for the reply.  Is there a lapel mic out there that you can use with the R09 that provides it's own phantom power?

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: Audio Technica 943 with R09 - Help!!
« Reply #3 on: April 10, 2008, 11:53:48 PM »
If you are going super low-pro, then you might consider Church Audio mics.  They run off the plug-in power of the R-09.
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline keekade

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 9
Re: Audio Technica 943 with R09 - Help!!
« Reply #4 on: April 11, 2008, 01:18:52 AM »
Many thanks!  Is the quality close to the AT943's?

Offline SmokinJoe

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 4210
  • Gender: Male
  • "75 and sunny"... life is so much simpler.
    • uploads to archive.org
Re: Audio Technica 943 with R09 - Help!!
« Reply #5 on: April 11, 2008, 06:54:37 AM »
Do you need "Phantom Power", or "Plug-in-power"?  Phantom is 48V and is normally used on "big mics".  Plug in power is something like 3-9V and is normally used for "small mics".  So normally your 943s would use plug in power, which the R-09 does provide, unless you specifically bought them with phantom power adapters.  If that is the case you need a phantom power supply, such as the Denecke PS-2.
Mics: Schoeps MK4 & CMC5's / Gefell M200's & M210's / ADK-TL / DPA4061's
Pres: V3 / ST9100
Decks: Oade Concert Mod R4Pro / R09 / R05
Photo: Nikon D700's, 2.8 Zooms, and Zeiss primes
Playback: Raspberry Pi > Modi2 Uber > Magni2 > HD650

 

RSS | Mobile
Page created in 0.199 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF