Become a Site Supporter and Never see Ads again!

Author Topic: toslink vs. spdif  (Read 5288 times)

0 Members and 1 Guest are viewing this topic.

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: toslink vs. spdif
« Reply #15 on: November 15, 2004, 06:28:34 PM »
don't we hear a ton of problems with the optical recording on the jb3's as it is? 

a year to a year and half ago yes, not anymore.
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Tony B

  • Needs more sun.
  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1375
  • Gender: Male
  • My primitive mind can't grasp these concepts.
Re: toslink vs. spdif
« Reply #16 on: November 15, 2004, 06:35:23 PM »
Around 20 shows on mine, all through optical, and not a problem with a single one.

I basically treat my toslink cable like I would any...uh..sensitive part of my body...and it's treated me well.

Besides, the fact that it's light carrying the sound trips me out   :o
Coffee is for Closers

MG m200>AM Hyperconducters>V3>JayBeeThree/h120

Offline Massive Dynamic

  • Trade Count: (21)
  • Taperssection All-Star
  • ****
  • Posts: 1421
  • Gender: Male
  • 20 years of the best in apocalyptic gothic metal
Re: toslink vs. spdif
« Reply #17 on: November 15, 2004, 06:45:18 PM »
Here's a link to a related thread from the Oade board.
Naiant X-X > SP-SPSB-1 > M10
Superlux S502 > Denecke PS-2 > Hosa MIT-435 > M10

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1184
  • Gender: Male
Re: toslink vs. spdif
« Reply #18 on: November 16, 2004, 11:27:24 AM »
The jb3 problems were:
1) issues with the 'grey' boxes that were converting coax > optical - they had trouble accurately reading the Sony s/pdif stream
2) optical cables not fully inserting into the JB3 because of that stupid ridge above the input jack
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

hexyjones

  • Guest
  • Trade Count: (0)
Re: toslink vs. spdif
« Reply #19 on: November 16, 2004, 11:36:13 AM »
No problems with the CO2 in my configuration...nothing obvious anyway...

the only time I got any static - I was using the JB3 analog line in...

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1184
  • Gender: Male
Re: toslink vs. spdif
« Reply #20 on: November 16, 2004, 12:54:46 PM »
The other nice thing about optical is you eliminate the issue of different voltage levels from different manufacturers.
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

 

RSS | Mobile
Page created in 0.254 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF