0 Members and 1 Guest are viewing this topic.
Thanks, that’s probably what I’ll end up doing. I would like to keep the mics from knocking around, maybe rubber XLR covers? I’m going to attempt taming of the wires with 1/4” split-sleeve Techflex, right now they’re just taped together.
You can use the 2-3" tube from mcmaster carr. Use a dremel to cut a straight notch vertically in the bottom piece for the cable to pass through and the top screws on. I use a desiccant pack to make it fit.https://www.mcmaster.com/2108T71/
Looking for options to neatly and safely store and protect the mics as well as the hardwired cables when not in use. Currently just sitting in ziplocs My old DPA 4022 had these rectangular plastic boxes that had foam inside to put the mics and XLR ends, then you would wind the cable around the box which had a lip around the edge, those worked pretty well. Thanks!James
Pelican case, easy. 2-3k for mics and peeps cheap out with getto storage solutions? Laughable
I am looking at getting Rycote mic tubes for Mic storage. Should be able to fit two CCMs in one tube with a foam divider. https://www.bhphotovideo.com/c/product/1391529-REG/rycote_079902_mic_protector_case_20mm.html