0 Members and 1 Guest are viewing this topic.
I take it that you would usually go line in instead of mic in (for amplified shows) right?
As I understand it (help me out other M-10 users!) always go line in for every recording, does not matter the mic, pre amp, etc. I "think" this is recommended b/c the sound/floor noise distortion is lower via line in vs. mic in......
I got in on Chris' deal o the century in August and finally got the following items:CA-14 OmniCA-14 CardsCA-9200 preampUpgraded cable (between recorder and preamp)Now I have some questions. I'm running a Sony PCM-M10.I went out the backyard the other night and did some ambient recording. Really pretty awesome setup!If I was to record a loud rock concert I should probably use the Line In right?I have been reading and it seems like the 9200 volume should be turned up all the way..Do I set my M10 to ~4 on the knob, and turn up the gain control on the 9200 until I get to ~-12db on the meters?And can anyone recommend a gain setting on the 9200 that works well for loud music (with CA-14 mics)?Trying to get a good routine down that will get me set pretty well before I even walk into the venue.