Become a Site Supporter and Never see Ads again!

Author Topic: Demagnetizing Cassette Deck Heads  (Read 21454 times)

0 Members and 1 Guest are viewing this topic.

Albix714

  • Guest
  • Trade Count: (0)
Demagnetizing Cassette Deck Heads
« on: October 16, 2005, 01:16:46 PM »
I need to demagnetize the heads of a Nak Cassette Deck 2. I found this info and I'm wondering if it's correct or if anyone has anything to add. Thanks.


Demagnetize Erase and Record Heads 
 

1.   Use a commercial tape deck demagnetizer. 
 
2.   With the deck off, turn on (or plug in, if the demagnetizer doesn't have a switch) demagnetizer away from deck, other audio equipment and tapes. 
 
3.   Slowly move tip of demagnetizer toward head. 
 
4.   Make sure the demagnetizer doesn't touch the tape head (the magnetic field will cause it to try). 
 
5.   Slowly move the tip back and forth across the tape head for a few seconds. Get close to the head without touching it. 
 
6.   Slowly pull demagnetizer far away from head. Unplug demagnetizer after demagnetizing both heads. 
 
 
  Tips: 
 Look for a demagnetizer with a plastic-coated tip. 
 
 Only demagnetize if you start to hear distortion on your tapes. 
 
 A hi-fi shop might also demagnetize your heads for you. 
 
 
  Warnings: 
 Used improperly, a demagnetizer will increase head magnetization. 
 
 A demagnetizer can damage tapes, speakers and other audio equipment. 

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Demagnetizing Cassette Deck Heads
« Reply #1 on: October 16, 2005, 02:16:32 PM »
Yes that is right.  I recall the exact same directions came with my demagnitizer.   I have an old-style sony wand and I never noticed the sort of magnetic field that would pull the tip toward the head.

The first rule of amateur neurosurgery club is .... I forget.

Offline Patrick

  • Evil Urges, Baby.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5220
  • Gender: Male
Re: Demagnetizing Cassette Deck Heads
« Reply #2 on: October 16, 2005, 07:01:28 PM »
I've got a TEAC demagnetizer that I use on my 4 track Reel to Reel. 

The damn thing is pretty powerful, actually.  And it is true, it WILL swipe a tape of its contents, one of the many reasons  digital technology took over!
Monitor Engineer: Band of Horses, Cage the Elephant, Bruce Hornsby, The Head and the Heart, Josh Ritter

Live Music Archive Bookmarks

BobW

  • Guest
  • Trade Count: (0)
Re: Demagnetizing Cassette Deck Heads
« Reply #3 on: October 17, 2005, 06:52:59 PM »
about three layers of good, thick packing tape or a dip or two in tool rubber insulation paint on the tip always worked for me.

These work, as well (and they get more laughs in the shop...):


Offline heath

  • Laugh it up, Fuzzball...
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 24817
  • Gender: Male
  • I'm score!!!!!!
    • The Upstream Mend
Re: Demagnetizing Cassette Deck Heads
« Reply #4 on: October 17, 2005, 11:03:58 PM »
just keep any and all media away from the thing.  unless you want to bulk erase, of course ;)

and make sure you follow the rule of pulling away slowly.  over-exaggerate it.  Pulling away quickly can re-initiate a magnetic charge.

h
And the Sultans... yeah the Sultans play creole

 The Upstream Mend

Albix714

  • Guest
  • Trade Count: (0)
Re: Demagnetizing Cassette Deck Heads
« Reply #5 on: October 18, 2005, 08:54:03 AM »
Thanks for alll the tips!!! Much appreciated.

zowie

  • Guest
  • Trade Count: (0)
Re: Demagnetizing Cassette Deck Heads
« Reply #6 on: October 20, 2005, 10:31:49 AM »
I never noticed any difference in sound from demagnitizing my cassette decks.   Matters more for R2R.

BobW

  • Guest
  • Trade Count: (0)
Re: Demagnetizing Cassette Deck Heads
« Reply #7 on: October 21, 2005, 04:39:49 PM »
I never noticed any difference in sound from demagnitizing my cassette decks.   Matters more for R2R.

Heavy use and chrome tapes make it more important.

If you hear it, it's likely in the top end.

Offline heath

  • Laugh it up, Fuzzball...
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 24817
  • Gender: Male
  • I'm score!!!!!!
    • The Upstream Mend
Re: Demagnetizing Cassette Deck Heads
« Reply #8 on: March 22, 2006, 10:23:36 AM »
just wanted to add a link to the best demag'er I've found.

http://www.blevinsaudio.com/handmag.html
And the Sultans... yeah the Sultans play creole

 The Upstream Mend

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing and cleaning Cassette Deck Heads
« Reply #9 on: February 07, 2016, 04:47:41 PM »
I'm working through a bunch of Cassettes circa 1982/3 on a borrowed Nakamichi LX-5 (from raoulduke-TY!) and started wondering about demagnetizing this thing. Almost all the tapes are Maxell XLII's and seem to have similar tonal characteristics, even with about three different mic set ups. I have been cleaning the heads and pinch rollers after about every 5 tapes since the first cleaning. The first cleaning did remove some heavy black dirt, then following the tape runs, the dirt is brownish but not too much.

After a cleaning I ran a GD show which of course is two tapes per show. set one tape has some awful low frequency distortions which none of the other tapes exhibit (edit to add the set 2 tape was passed through after the demagnetizing). So upon hearing that, I realized I had not demagnetized yet after almost 20 tapes being run through. i ran my Realistic demagnetizer on it and the rest of the run didn't appear to have those sound issues. (about 4 tapes so far). I am about to run the problem tape again to see if another pass post demagging will help it. My overall goal has been to not run them through more than once, and if they are not tails out to side A, i run Side B first etc, no extra crossing of the tape heads with the over 30 year old tapes.

Should I be concerned about the problematic tape? did I erase some of it with magnetized heads? Ho often would someone suggest I use the demagnetizer? do you think I am cleaning too much, or not enough?
Should I be heating these babies up in a toaster oven like has been suggested on the JGB forums or what Rob Eaton did for the Betty boards?
I also have one of those Discwasher cassette demags taoes colored red.

What do you guys think?
So far They are mostly sounding great given their age! I have been storing them as best as one could over the years, including a 8 year stint at my mothers in a totally Air Conditioned environment while I was on tour in the 90's and never really had a space of my own to store them in.
« Last Edit: February 07, 2016, 05:08:53 PM by rocksuitcase »
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline raymonda

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1631
Re: Demagnetizing Cassette Deck Heads
« Reply #10 on: February 08, 2016, 09:21:43 AM »
Demagnetization should only be needed after 25 to 30 hours of play, with sometimes after 50 depending on the type of tapes used. Whether it is cassette or R2R, all players will require demagnetizing. Demagnetizing more than that will most likely have the opposite effect and cause you to magnetize your heads.

The tape that has the distortion may not have been caused by you but rather it may have been an "in the field" user error of clipping the mic preamp, thus causing distortion. Most tapers have been guilty of this at some point. The taper might not have padded down the signal and clipped the heck out of his preamp. One way to tell is if he has the encore on the first tape. If that sounds clean, as well as the second set, then in all likelihood it was an "in the field" error.

Those are some great years to have and much needed, especially if it is with something other than Nakamichi 100 or 300 and if the were FOB. Even Senn. 421 or 441, would be preferred. Of course Nakamichi 700 or 1000 were also preferred. That is not to say that Tony S. didn't pull some great 300 tapes back in the day. He had it figured out and some of his 300's are the best recordings using these mics that i have heard.

BTW, I had a friend who recorded with Nuemann KM84's, however, because he sent a too hot signal to his D5 he has hundreds of hours of recordings that are distorted and these were years from 1982-1990. I was doing a bulk transfer and was extremely disappointed with the recordings. A clean recording using a cheap mic is always preferred over one that has clipping. I eventually gave up on the transfers due to poor results.


Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #11 on: February 08, 2016, 10:00:53 AM »
Ray, thanks for the input. Oddly enough I was invoking your name in text to another taper buddy just yesterday- as both of us had Mark for a mentor.

I will be sending these recordings to either raoulduke or kindms to do the post processing; we have a game plan that I will take them off using the Nak's and send the raw files to them; any that are quality enough to be upped, we will. For instance, I notice there are no audiences of GD 1982-08-04 on the LMA; mine was done with Beyer M 201's (which Mark recommended we buy/use) in the 100 sections about 25 feet from the stacks, not as nice as an FOB, but surprisingly nice. The tape in question is 1982-08-03 Starlight theater, and I was plugged into someone's Nak 300's into my D5 (I know who, but won't say here as I have never seen any of his recordings or his name on the LMA).

Back OT, and I welcome other input based on cleaning or demagnetizing (i.e. any specific brand fluid to rec re: head cleaner or pinch roller cleaner?) should I even touch the pinch rollers? that is a topic which has more than two sides to it! I do feel that your advice is more like what it was, that the lead deck on this tape (Nak 550) was set too high for side one of set 1, as side 2 has almost none of the same "distortion". After further listeing, I feel your intuition is accurate. I may try to run side A back through just to see. Of course, I am worried about too many passes of the masters and or not wanting to harm or use the NAk LX-5 for anything other than taking off the masters one pass at a time.

As I told raoulduke, I am notorious for killing cassette decks (as kindms!).

Thanks again Ray    8)
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline raymonda

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1631
Re: Demagnetizing Cassette Deck Heads
« Reply #12 on: February 08, 2016, 10:39:59 AM »
The Beyer 201's in the right place can get you some fine results. It will be a great addition to the archives.

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #13 on: February 08, 2016, 11:47:29 AM »
I'm being surprised by many of these Beyer recordings. Back in the day, possibly due to playback limitations, we though the Nak's were "better" sounding, and we had improved our overall approach, mic and deck wise by 1983, so many of these 1982 tapes never got too much play. we always made several first gens on one pass once we got back home, and the masters were rarely, if ever, played after that.

Once we get the project ready for upload, I will start a thread on it. it looks like 13 1982 shows, and about 40 1983's.
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline raymonda

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1631
Re: Demagnetizing Cassette Deck Heads
« Reply #14 on: February 08, 2016, 12:10:02 PM »
That's great.

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #15 on: February 08, 2016, 12:16:03 PM »
Ray- I welcome other input based on cleaning or demagnetizing (i.e. any specific brand fluid to rec re: head cleaner or pinch roller cleaner?) hould I even touch the pinch rollers?
Thanks   
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline jefflester

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1557
  • Gender: Male
Re: Demagnetizing Cassette Deck Heads
« Reply #16 on: February 08, 2016, 06:20:58 PM »
Once we get the project ready for upload, I will start a thread on it. it looks like 13 1982 shows, and about 40 1983's.
Any of those 83s happen to include 1983-08-26 Portland? My 3rd show, and what's on LMA and whatever else I've traded for are disappointing. I have a cass of partial 2nd set from back in the day that sounds better than any subsequent copy I've gotten a hold of. At the show I remember a number of stands running very high and very FOB.
DPA4061 HEB -> R-09 / AT943 -> CA-UGLY -> R-09
AKG CK63 -> nBob actives -> Baby NBox -> R-09/DR2d
AKG CK63 -> AKG C460B -> Zoom F8/DR-680MKII
Line Audio CM4/Superlux S502/Samson C02/iSK Little Gem/Sennheiser E609/Shure SM57 -> Zoom F8/DR-680MKII (multitracked band recordings)

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #17 on: February 08, 2016, 06:42:20 PM »
Once we get the project ready for upload, I will start a thread on it. it looks like 13 1982 shows, and about 40 1983's.
Any of those 83s happen to include 1983-08-26 Portland? My 3rd show, and what's on LMA and whatever else I've traded for are disappointing. I have a cass of partial 2nd set from back in the day that sounds better than any subsequent copy I've gotten a hold of. At the show I remember a number of stands running very high and very FOB.
Jeff, we were there taping with the 201's; I have not transferred that one yet; I'll see if I can locate it just to see what I have. when we get them transferred and processed, we will keep announcing.
Some have asked me why I want to do this with all the SBD's on LMA, but I have looked at enough 82-83 shows to determine why not? Any Jim Wise show will be "better" than ours as we were usually 10-20 feet behind his crew- they were crazy out of control for those years! However, some of ours do haev some fine Beyer sweetness!
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline raymonda

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1631
Re: Demagnetizing Cassette Deck Heads
« Reply #18 on: February 08, 2016, 08:49:24 PM »
90% isopropyl alcohol or more nothing less and certainly not rubbing alcohol, as they add all kinds of stuff to that. Use it on pinch rollers, capstan and heads.

Clean after 4 or more tapes, maybe more depending on how what the tape leaves behind. I use ear swabs.

I also have some rubber revitalized that can be used on belts and the pinch rollers. But you have to let that soak in overnight. Afterwards, I give it a light cleaning to remove any left over residue.


Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #19 on: February 08, 2016, 09:28:54 PM »
90% isopropyl alcohol or more nothing less and certainly not rubbing alcohol, as they add all kinds of stuff to that. Use it on pinch rollers, capstan and heads.

Clean after 4 or more tapes, maybe more depending on how what the tape leaves behind. I use ear swabs.

I also have some rubber revitalized that can be used on belts and the pinch rollers. But you have to let that soak in overnight. Afterwards, I give it a light cleaning to remove any left over residue.
Thank you so much for this info. I was wondering about the pinch roller rubber stuff.  I think I will seek some out. I found these nice swabs via my job that are for tape heads, printer parts etc.
Swab its brand- http://www.swab-its.com
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline jlykos

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 4416
  • Gender: Male
  • Don't sweat the technique
Re: Demagnetizing Cassette Deck Heads
« Reply #20 on: February 11, 2016, 05:45:11 AM »
Everclear works well to clean tape deck heads and a pint will only cost you a few bucks. A demagnetizer works well also, but you need to be careful when using it.
dpa 4061 > Church Audio 9200 > Sony PCM-D50 (Moon Audio Silver Dragon v3 interconnect)

"I have no views," Mickey Melchiondo, known as Dean Ween, said in a philosophical moment. "I am way too stupid. I have no strong feelings about anything. I'm really into television and the computer. I believe everything I see on TV and read on the Internet."

Offline down2earthlandscaper

  • Gear Collector (Slut/Hoarder) and Multiple-Rig Maniac
  • Site Supporter
  • Trade Count: (29)
  • Taperssection Member
  • *
  • Posts: 905
  • Gender: Male
Re: Demagnetizing Cassette Deck Heads
« Reply #21 on: February 12, 2016, 12:38:06 AM »
I'm being surprised by many of these Beyer recordings. Back in the day, possibly due to playback limitations, we though the Nak's were "better" sounding, and we had improved our overall approach, mic and deck wise by 1983, so many of these 1982 tapes never got too much play. we always made several first gens on one pass once we got back home, and the masters were rarely, if ever, played after that.

Once we get the project ready for upload, I will start a thread on it. it looks like 13 1982 shows, and about 40 1983's.

Can't wait to hear these when you're done!
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Countryman B2D
DPA 4061's DPA 4022's; DPA 4080; AKG 480 ck61 and ck63; Naiant AKG Active Cables
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Mixpre 10T and 6; Roland R-07; Marantz PMD620; Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #22 on: February 12, 2016, 12:33:42 PM »
I'm being surprised by many of these Beyer recordings. Back in the day, possibly due to playback limitations, we though the Nak's were "better" sounding, and we had improved our overall approach, mic and deck wise by 1983, so many of these 1982 tapes never got too much play. we always made several first gens on one pass once we got back home, and the masters were rarely, if ever, played after that.

Once we get the project ready for upload, I will start a thread on it. it looks like 13 1982 shows, and about 40 1983's.

Can't wait to hear these when you're done!
we will post the thread and put them up on LMA (at least the ones worthy)  8)
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline heath

  • Laugh it up, Fuzzball...
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 24817
  • Gender: Male
  • I'm score!!!!!!
    • The Upstream Mend
Re: Demagnetizing Cassette Deck Heads
« Reply #23 on: March 03, 2016, 05:19:27 PM »
As was said above, 99% Isopropyl on the heads.  I won't touch pinch rollers with anything other than pinch roller cleaner here at the studio (for both my reel to reels and the cassette decks).  I've seen alcohol dry out rubber rollers and they cost too much to have rebuilt these days.  I'd recommend a dedicated pinch roller cleaner--you can find a few options via google.

Clean every few passes, as needed.  Baking cassettes from that era probably won't be needed.  Only if you see significant oxide residue and tapes are literally gumming up and stopping (at which point you've probably done some damage....)

Speaking of cassette decks, I've been building this rig for the past few weeks.  It'll be a fun one. 

And the Sultans... yeah the Sultans play creole

 The Upstream Mend

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #24 on: March 04, 2016, 01:23:26 AM »
Thanks for the info on baking Heath. My buddy who was part of the Jerry Moore JGB project says they had to bake several of his tapes.
Most of mine so far, almost all Maxells, do not seem to shed much.
Great photo, what is the model Tascam there, and how much do they retail for?
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline heath

  • Laugh it up, Fuzzball...
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 24817
  • Gender: Male
  • I'm score!!!!!!
    • The Upstream Mend
Re: Demagnetizing Cassette Deck Heads
« Reply #25 on: March 04, 2016, 02:13:36 PM »
Those are Tascam 122 mkIII - industry workhorses.  I used to have racks of Nak MR-1s, but they just prove too delicate for the amount of use they see in our facility.  The Tascams hold up much better.

Prices are all over the board depending upon condition.
And the Sultans... yeah the Sultans play creole

 The Upstream Mend

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #26 on: March 04, 2016, 06:31:49 PM »
Those are Tascam 122 mkIII - industry workhorses.  I used to have racks of Nak MR-1s, but they just prove too delicate for the amount of use they see in our facility.  The Tascams hold up much better.

Prices are all over the board depending upon condition.
Thanks for the info.
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8277
  • Gender: Male
    • RockSuitcase: stage photography
Re: Demagnetizing Cassette Deck Heads
« Reply #27 on: April 02, 2021, 02:56:05 PM »
As was said above, 99% Isopropyl on the heads.  I won't touch pinch rollers with anything other than pinch roller cleaner here at the studio (for both my reel to reels and the cassette decks).  I've seen alcohol dry out rubber rollers and they cost too much to have rebuilt these days.  I'd recommend a dedicated pinch roller cleaner--you can find a few options via google.

Clean every few passes, as needed.  Baking cassettes from that era probably won't be needed.  Only if you see significant oxide residue and tapes are literally gumming up and stopping (at which point you've probably done some damage....)

Speaking of cassette decks, I've been building this rig for the past few weeks.  It'll be a fun one.
Reviving this old thread as I have been doing a bit of cassette transfer work these days and am about to do more. I just bought via Amazon dedicated pinch roller cleaner with tape head cleaner, the brand used to be the studio standard- SR Audio- has now renamed itself Audio 456.
https://www.amazon.com/gp/product/B00JDG86OE/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

I am going to add more about head cleaning next. Anyone have favorite brands? Post them here.
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 3176
  • Gender: Male
  • Jarts don't kill people!
Re: Demagnetizing Cassette Deck Heads
« Reply #28 on: April 08, 2021, 05:29:09 PM »
As was said above, 99% Isopropyl on the heads.  I won't touch pinch rollers with anything other than pinch roller cleaner here at the studio (for both my reel to reels and the cassette decks).  I've seen alcohol dry out rubber rollers and they cost too much to have rebuilt these days.  I'd recommend a dedicated pinch roller cleaner--you can find a few options via google.

Clean every few passes, as needed.  Baking cassettes from that era probably won't be needed.  Only if you see significant oxide residue and tapes are literally gumming up and stopping (at which point you've probably done some damage....)

Speaking of cassette decks, I've been building this rig for the past few weeks.  It'll be a fun one.
Reviving this old thread as I have been doing a bit of cassette transfer work these days and am about to do more. I just bought via Amazon dedicated pinch roller cleaner with tape head cleaner, the brand used to be the studio standard- SR Audio- has now renamed itself Audio 456.
https://www.amazon.com/gp/product/B00JDG86OE/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

I am going to add more about head cleaning next. Anyone have favorite brands? Post them here.

Intraclean S-711 if you can find it.  Hands down the best head cleaner and banned for causing cancer.  It is a heavy chlorinated hydrocarbon.  It smells sooooo good though.   :cheers:
Mics: Schoeps MK 5 MP, Schoeps MK 8 MP, Schoeps MK 41 MP, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2, Sonosax SX/M2-LS, E.A.A. PSP-2, Baby Nbox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6ii, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Little Dot MK III > Sennheiser HD700
http://archive.org/bookmarks/kskreider
https://www.concertarchives.org/kskreider
https://archive.org/details/thespps

Offline tapjunkie

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 236
Re: Demagnetizing Cassette Deck Heads
« Reply #29 on: April 09, 2021, 03:05:53 PM »
Try American Recorder technologies.  805.527.9580 They sell the new version of the Intraclean solution head cleaner.  Look for one of those TDK cassette head
Demagnetizers that you just put into the deck and push play for several seconds.  They may have that too.  I buy my swabs for cleaning at Markertek.

« Last Edit: April 09, 2021, 03:09:59 PM by tapjunkie »

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5944
Re: Demagnetizing Cassette Deck Heads
« Reply #30 on: April 10, 2021, 03:07:20 AM »
I read that windex works to clean pinch rollers, but I also read that there are different formulations for rollers and they don’t all react the same.
Soap and water, rinsed with water also works. Be sure to dry thoroughly.

https://www.gearslutz.com/board/so-much-gear-so-little-time/147722-pinch-roller-cleaner-where.html
Someone said clean them until no more brown material comes off. If you get black gunk, stop- that is the roller.
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

 

RSS | Mobile
Page created in 0.12 seconds with 54 queries.
© 2002-2024 Taperssection.com
Powered by SMF