Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: justink on June 04, 2019, 04:02:03 PM
-
Does anyone know if the new MMP-ER “actives” fit the standard kwon/Nola bars like the old 4023’s do?
-
the rear collar does not have the large diameter collar of the 4023 lemos, just a strain relief on a 2.2mm cable
they are meant to be clipped around the main diameter of the mic between the two raised rails, really no other way to mount them
-
the rear collar does not have the large diameter collar of the 4023 lemos, just a strain relief on a 2.2mm cable
they are meant to be clipped around the main diameter of the mic between the two raised rails, really no other way to mount them
Gotcha. So the standard DPA “ring” type mounts should work.
-
I'm very happy with the mounts that Scott made for me. Scott will design additional configurations for mounts upon request.
DPA 4011-ER/ES: DIN / DINa Mount
DIN: http://shpws.me/OPak
DINa: http://shpws.me/OPcj
-
I'm very happy with the mounts that Scott made for me. Scott will design additional configurations for mounts upon request.
DPA 4011-ER/ES: DIN / DINa Mount
DIN: http://shpws.me/OPak
DINa: http://shpws.me/OPcj
can you measure the width where it grips the capsule and I’ll tell you if it fits the actives.
-
I'm very happy with the mounts that Scott made for me. Scott will design additional configurations for mounts upon request.
DPA 4011-ER/ES: DIN / DINa Mount
DIN: http://shpws.me/OPak
DINa: http://shpws.me/OPcj
can you measure the width where it grips the capsule and I’ll tell you if it fits the actives.
^
jerryfreak I have the DPA 4011 MMP-ER actives and the Shapeways' mounts that I linked to fits them well.
-
Thanks
Sorry got you confused with op