Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: ts on April 30, 2023, 04:08:36 PM

Title: Talentcell to SD Mix Pre 3/6
Post by: ts on April 30, 2023, 04:08:36 PM

Anyone ever try this? Talentcell has 5V, 9V and 12V outputs.

Title: Re: Talentcell to SD Mix Pre 3/6
Post by: Twenty8 on April 30, 2023, 08:23:59 PM

6ii.  Talentcell, 12v via custom hirose cable > SD MX Hirose sled.

Title: Re: Talentcell to SD Mix Pre 3/6
Post by: ts on May 01, 2023, 09:43:37 AM

Quote from: Twenty8 on April 30, 2023, 08:23:59 PM

6ii.  Talentcell, 12v via custom hirose cable > SD MX Hirose sled.

Nice. I'll need to make a usb-c cable to the right size connector for the Talentcell 12V output.  I use the 9V output for my V2 and I think that's 5.5x2.1 and the 12V is 5.5x2.5? Or vice versa. I know those outputs have a different size pin. Or I can get one of those nice sleds! I do have the hirose cable already. What's better? The hawk-woods or the cable techniques.

Title: Re: Talentcell to SD Mix Pre 3/6
Post by: Twenty8 on May 01, 2023, 01:32:06 PM

Quote from: ts on May 01, 2023, 09:43:37 AM

Or vice versa.

Yes, you had that backwards.
12v is 5521
9v is 5525

My cable came with a battery during a YSale purchase so I can not really suggest a cable and I don't know who made it.  Tip to tail its 21", right angle, 5521 for 12v.  Never run my MP6ii any other way actually, but I am in the minority as most of the other members with the same battery/deck combo run USB to USB-C right angle.

Title: Re: Talentcell to SD Mix Pre 3/6
Post by: ts on May 01, 2023, 04:13:29 PM

Thanks! I ordered a hirose sled since I already had the cable. I used to get crazy run times off the Talentcell powering a 722 and V2. Hoping I get the same with the MixPre 6 and V2.