Become a Site Supporter and Never see Ads again!

Author Topic: Has anyone run a V3 with the 722 ?  (Read 10486 times)

0 Members and 1 Guest are viewing this topic.

Offline bkirby

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 768
  • Gender: Male
  • Schoeps/MGs > M148/248 > SD722
Re: Has anyone run a V3 with the 722 ?
« Reply #15 on: November 16, 2005, 01:07:51 PM »
I have been meaning to do a test, and I'll see if I have time to do this either tonight or tomorrow night. If I put this on disc, will someone upload it for me somewhere?

MK21 > KC5 > CMC6XT > M148 > V3 > SD722
MK21 > KC5 > CMC6XT > M148 > SD722
MK21 > KC5 > CMC6XT > V3 (line out) > SD722
MK21 > KC5 > CMC6XT > V3 (24/96) > SD722
MK21 > KC5 > CMC6XT > SD722

It will be a home test and I will use the same song and make levels as equal as I can. I can also try this with the MK41 caps and the MGs. I will try and get this done ASAP...

Offline bagtagsell

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1221
  • Gender: Male
  • Man is condemned to be free- Sartre
Re: Has anyone run a V3 with the 722 ?
« Reply #16 on: November 16, 2005, 01:44:17 PM »
Quote
MK21 > KC5 > CMC6XT > M148 > V3 > SD722

thats one expensive hd recorder
MG200/210>m148>v3>MT2496
                       
*aspiring gear slut of the month year*
"I am the gear slut goo goo g’joob g’goo goo g’joob"

Offline T.J.

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2474
  • Gender: Male
  • Always look on the Bright Side of Life
    • My shows taped on LMA
Re: Has anyone run a V3 with the 722 ?
« Reply #17 on: November 16, 2005, 01:59:54 PM »
I have a few shows in atlantic city this weekend that I need to be prepared for, and this is my first leap out of the dat realm. 

good luck with the new rig jon. they should be a couple interesting shows. looking foward to hearing the "tapes" +T

Offline pilgrims622

  • Trade Count: (7)
  • Taperssection Member
  • ***
  • Posts: 424
  • Gender: Male
Re: Has anyone run a V3 with the 722 ?
« Reply #18 on: November 16, 2005, 02:27:53 PM »
If you are into Panic at all, I just ran: Neumann ak40 > lc3 > km100 > Lunatec V3(analog out) > 722 @ 24/96...I absolutely love the V3(analog out)>722 combo...It sounds so sweet with the Neumanns...24bit really makes the Neumanns shine!!! 

10/30 http://digitalpanic.org/btforums/showthread.php?t=12942 
10/31 http://digitalpanic.org/btforums/showthread.php?t=12871

Put it this way...I dont own a 722, but since I have run it with the Neumanns and v3, I am only weeks away from ordering my own, but I am looking at the 744  :)

Neumann km140
Sound Devices 722

Offline Jonathan_Hatgis

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 25
  • Gender: Male
  • Pristine quality audio for the masses
Re: Has anyone run a V3 with the 722 ?
« Reply #19 on: November 16, 2005, 02:56:46 PM »
thank you so much for the input, everyone  :)
TLM170's > V3 > 722

I'll alway's give a patch

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6696
Re: Has anyone run a V3 with the 722 ?
« Reply #20 on: November 16, 2005, 03:26:45 PM »
I've been basking in the single device glow of the 722..  How comparable is V2 > 722 vs. V3 line > 722?   I know that the V2 lacks the good meters of the V3, but that wouldn't matter with the 722 meters.

I still haven't tried mme > 722.  Anyone done any minime > 722 comps? How about 24/96 out of a minime via AES?

Somewhat related to this thread, has anyone noticed an impact from using simple XLR splitter cables?  Having two preamps wired-in changes the impedance of the system, etc, no?


Offline JasonSobel

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3327
  • Gender: Male
    • My show list
Re: Has anyone run a V3 with the 722 ?
« Reply #21 on: November 16, 2005, 03:38:22 PM »
I've been basking in the single device glow of the 722..  How comparable is V2 > 722 vs. V3 line > 722?   I know that the V2 lacks the good meters of the V3, but that wouldn't matter with the 722 meters.

in theory, the V2 > 722 would be identical to the V3 (line out) > 722, because the V3 has the same pre-amp as the V2.  in actuality, Mike Grace had to change one or two minor parts in the pre-amp for the v3, so it is not absolutely identical to the V2.  in practice though, it is generally regarded as the same pre-amp.  another advantage that the V3 has, in addition to the meters, is the ability to give a 16 bit S/PDIF output to patchers.  that may or may not be a consideration.

Offline pilgrims622

  • Trade Count: (7)
  • Taperssection Member
  • ***
  • Posts: 424
  • Gender: Male
Re: Has anyone run a V3 with the 722 ?
« Reply #22 on: November 16, 2005, 05:04:30 PM »
another advantage that the V3 has, in addition to the meters, is the ability to give a 16 bit S/PDIF output to patchers.  that may or may not be a consideration.

This is very true and when I get a 7series recorder, I will still run the jb3 as backup...

This summer I ran v3(analog)>744@24/96, v3(opti)>jb3@16/48, and v3(s/pdif)>M1@16/48...always good to have backup
Neumann km140
Sound Devices 722

Offline Zee

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 381
  • Gender: Male
  • Knuckle!
Re: Has anyone run a V3 with the 722 ?
« Reply #23 on: November 16, 2005, 06:28:47 PM »
I've been basking in the single device glow of the 722..  How comparable is V2 > 722 vs. V3 line > 722?   I know that the V2 lacks the good meters of the V3, but that wouldn't matter with the 722 meters.

in theory, the V2 > 722 would be identical to the V3 (line out) > 722, because the V3 has the same pre-amp as the V2.  in actuality, Mike Grace had to change one or two minor parts in the pre-amp for the v3, so it is not absolutely identical to the V2.  in practice though, it is generally regarded as the same pre-amp.  another advantage that the V3 has, in addition to the meters, is the ability to give a 16 bit S/PDIF output to patchers.  that may or may not be a consideration.

I love the sound of 4022>V2>722
4022>v2>722
Please dither and resample as you see fit!

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Has anyone run a V3 with the 722 ?
« Reply #24 on: November 16, 2005, 06:36:08 PM »
I love the sound of 4022>V2>722

I've run 4023>V3>722 several times now and it's about as close to pure sex as you can get without ruining the resale value of your speakers.
The first rule of amateur neurosurgery club is .... I forget.

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4634
  • Gender: Male
Out of the game … for now?

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
The first rule of amateur neurosurgery club is .... I forget.

Offline Jonathan_Hatgis

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 25
  • Gender: Male
  • Pristine quality audio for the masses
Re: Has anyone run a V3 with the 722 ?
« Reply #27 on: November 17, 2005, 03:40:18 AM »
I've been basking in the single device glow of the 722..  How comparable is V2 > 722 vs. V3 line > 722?   I know that the V2 lacks the good meters of the V3, but that wouldn't matter with the 722 meters.

I still haven't tried mme > 722.  Anyone done any minime > 722 comps? How about 24/96 out of a minime via AES?

Somewhat related to this thread, has anyone noticed an impact from using simple XLR splitter cables?  Having two preamps wired-in changes the impedance of the system, etc, no?



I have a minime that needs slight work done to it, I'm thinking of getting it done, running that comparrison as well.  I will post about it when I do, but it wont be for quite some time, as I just spent a lot of money on the 722! :)
TLM170's > V3 > 722

I'll alway's give a patch

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Has anyone run a V3 with the 722 ?
« Reply #28 on: November 20, 2005, 03:19:26 AM »
the 2 shows I will be recording this weekend

What, no update?  :D

How did you like the V3 line>722?


The first rule of amateur neurosurgery club is .... I forget.

Offline Cooker

  • Local Crew
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8720
  • Gender: Male
Re: Has anyone run a V3 with the 722 ?
« Reply #29 on: November 20, 2005, 02:03:36 PM »
better question: which drummer did you like the best?

 

RSS | Mobile
Page created in 0.277 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF