Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: slightlys on July 17, 2007, 05:04:28 AM
-
So i went out to tape a show. I set everything up and check levels everything is working properly. I press record and step away about ten mins later i come back to check on my gear and notice that the JB3 is not getting a signal and phontom power has turned itself off. as the ua-5 will do as the battery dies. I had fully charged the battery today. so I check out the battery its a 9.6V 3000mAh rc bat. and the lower quater of the battery is hot to the touch not burn you hot but deffinatly more than just warm. ANy thoughts