Topic: Edirol R09 HR level buttons don't work

[absnj]

I went to set levels on my R09 HR last night and found I could not change them- buttons have no effect.  I was able to set with the remote, so I assume it's a mechanical problem with the switches... the UP button has the normal click when pushed, but the DOWN is spongy when pressed, no click.

Any suggestions, or do I send it to Roland for repair?

[su6oxone]

If the hold button was not on, and the device was set to record or record standby, then the only reason for the levels to not change is probably mechanical failure.  I would check those things and send it in to Roland. 

[Belexes]

If you are handy, I would crack it open and check things out before sending into Roland.  I opened my R-09 (not HR, but I have an HR now) and it was easy to put back together.