Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Roland R-09HR  (Read 1946 times)

0 Members and 1 Guest are viewing this topic.

Offline berniebeaudry

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 23
Roland R-09HR
« on: October 19, 2012, 02:40:22 PM »
The 1/8th inch line input jack is becoming intermittent on my recorder.  Its the jack I use the most and is obviously wearing out.  Any recommendations for where to get it repaired?  Its out of warranty.
Thanks,
Bernie
Logged

Offline ScoobieKW

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1664
    • ScoobieSnax Audio Archive
Re: Roland R-09HR
« Reply #1 on: October 19, 2012, 06:41:17 PM »
Roland will do out of warranty repairs for $80 an hour, billed in 15 minute increments. This is comparable to most electronics repair shops. Their having parts in house will help too. There is a service center locator or you can ship to their LA shop.

http://www.rolandus.com/support/service_repair/
Logged
Busman BSC1, AT853 (O,C),KAM i2 Chuck Mod (C), Nak 300 (C),
M10, UA-5, US-1800, Presonus Firepod

http://kennedy-williams.net/scoobiesnax/

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: Roland R-09HR
« Reply #2 on: October 20, 2012, 12:56:39 PM »
With what new recorders are going for, it seems unlikely to be economical to fix the thing unless it's a VERY quick fix.  I broke the front panel on mine (not the actual screen, but the plastic in front of it). They pretty much told me to just dump it and buy a new one...
Logged
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline nsureit

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 9
  • Gender: Male
  • Someone turned the red light on!
Re: Roland R-09HR
« Reply #3 on: October 22, 2012, 08:23:56 PM »
I was having similar issue with 1/8" in on my DENON mini-DAT.  It's 20 years old, and I was going to junk it, but instead grabbed a Q-tip, sprayed on some fader cleaner, and swabbed out the jack.  PRESTO!  All is good now.
« Last Edit: October 23, 2012, 07:21:48 PM by nsureit »
Logged
Fairly New To Taping World
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.063 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF