Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: Life In Rewind on January 20, 2015, 09:14:27 PM
-
Im getting rid of my collection of Creative JB3s - but realized all these new 5V battery packs might be perfect for this old standby.
How about this cable?
I think that's the plug? Probably need the 2A output on the battery?
http://www.ebay.com/itm/like/301391658851?lpid=82&chn=ps
(http://i.ebayimg.com/00/s/NjAwWDYwMA==/z/pxsAAOSwv1RUZByp/$_3.JPG)
-
I'd pull out my McCrapper (MT2496) before I pulled that JB3 back out. No thank-ya. ;)
-
When you can get a decent 24 bit SD card recorder for under $100, there really is no reason to invest in stuff for your JB3 (or DAT, mini disc, iriver, etc)
-
Jb3 might be old but that cable would work with any 5v device utilizing the same tip. I wouldn't trash them
-
When you can get a decent 24 bit SD card recorder for under $100, there really is no reason to invest in stuff for your JB3 (or DAT, mini disc, iriver, etc)
I already have the 5V battery to power my TASCAM DR-70D...so the only investment here will be a few bucks for a cable.
I have 4 JB3s...going to keep one for the rare occasion I might wish for a bit bucket.
-
Jb3 might be old but that cable would work with any 5v device utilizing the same tip. I wouldn't trash them
The cable in question is a Sony PlayStation Portable accessory...(one application)
I've been using the PSPs wal-wart to power my JB3 for years.
Creative was way ahead of the game with this early 5V device! ( I guess due to the HD power spec)
-
Im getting rid of my collection of Creative JB3s - but realized all these new 5V battery packs might be perfect for this old standby.
How about this cable?
I think that's the plug? Probably need the 2A output on the battery?
http://www.ebay.com/itm/like/301391658851?lpid=82&chn=ps
(http://i.ebayimg.com/00/s/NjAwWDYwMA==/z/pxsAAOSwv1RUZByp/$_3.JPG)
I think it needs the 2A output on the battery