Become a Site Supporter and Never see Ads again!

Author Topic: Trial Soundforge  (Read 5808 times)

0 Members and 1 Guest are viewing this topic.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Trial Soundforge
« on: February 17, 2004, 06:15:13 PM »
If someone wanted to try Soundforge, where might they start.

-Kevin

Offline timP

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3537
  • Gender: Male
Re:Trial Soundforge
« Reply #1 on: February 17, 2004, 07:01:37 PM »
don't remeber where I found the demo but it was the 1st time I tried any music software and worked on a project for 3 hours.. then when I went to save it, it said I couldn't with the demo... just about started  pulling my hair out....
FWIW
?>FR2LE

jpschust

  • Guest
  • Trade Count: (0)
Re:Trial Soundforge
« Reply #2 on: February 17, 2004, 07:09:39 PM »
forget where it is, but go find the demo- it allows you full use in 7.0 for a month i believe.

jpschust

  • Guest
  • Trade Count: (0)
Re:Trial Soundforge
« Reply #3 on: February 17, 2004, 07:13:01 PM »
ugh.  come on man, not an appropriate place to post pirating stuff.  

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re:Trial Soundforge
« Reply #4 on: February 17, 2004, 07:47:58 PM »
gimme a frickin break man.  how else you gonna try it? 7.0 sucks get 6 while you can. btw i dont think im the first to drop nova on here.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

jpschust

  • Guest
  • Trade Count: (0)
Re:Trial Soundforge
« Reply #5 on: February 17, 2004, 07:55:04 PM »
just because you arent the first doesnt make it right.

you don't know who is watching the board, and this has the potential to bring lots of bad attention to the board.  There are things that some do on here that may possibly be questionable, but providing access to piracy is pretty clearly illegal.

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re:Trial Soundforge
« Reply #6 on: February 17, 2004, 07:58:55 PM »
anyone know a good lawyer?
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re:Trial Soundforge
« Reply #7 on: February 17, 2004, 08:03:10 PM »
one word: latency. you compare. i dont even use it anyway. ill send you mine if you want it. i prefer wavelab.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

jpschust

  • Guest
  • Trade Count: (0)
Re:Trial Soundforge
« Reply #8 on: February 17, 2004, 08:09:35 PM »
i use them both- they both have different features that are great.  ive never had a latency issue with SF, but to be honest i dont work in it as much as i used to- im re-exploring wavelab currently.  its nice to have both at my disposal.

this doesn't change that piracy is wrong.

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re:Trial Soundforge
« Reply #9 on: February 17, 2004, 08:11:59 PM »
i apologize. cheers.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

jpschust

  • Guest
  • Trade Count: (0)
Re:Trial Soundforge
« Reply #10 on: February 17, 2004, 08:13:57 PM »
dont apologize, remove the content of your post

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re:Trial Soundforge
« Reply #11 on: February 17, 2004, 08:17:44 PM »
yassir
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re:Trial Soundforge
« Reply #12 on: February 18, 2004, 01:17:08 AM »
if you really just want to try soundforge then you should just go to the webby and download the trial.

ed


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.

jpschust

  • Guest
  • Trade Count: (0)
Re:Trial Soundforge
« Reply #13 on: February 18, 2004, 01:20:17 AM »
im right there with ya ed.

zowie

  • Guest
  • Trade Count: (0)
Re:Trial Soundforge
« Reply #14 on: February 18, 2004, 10:53:03 AM »
just because you arent the first doesnt make it right.

you don't know who is watching the board, and this has the potential to bring lots of bad attention to the board.  There are things that some do on here that may possibly be questionable, but providing access to piracy is pretty clearly illegal.

It is a legal 30 day demo, downloadable from Sound Forge.

 

RSS | Mobile
Page created in 0.091 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF