Become a Site Supporter and Never see Ads again!

Author Topic: Sennheiser Active Setup - MKH 8000 Part II  (Read 46422 times)

0 Members and 1 Guest are viewing this topic.

Offline CQBert

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1157
  • Gender: Male
  • Sunset in Zilker Park
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #30 on: April 22, 2008, 11:26:52 AM »
Thanks Mike -

CQBert
Sennheiser MKH 8040 (Matched) > Sound Devices 702

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #31 on: April 22, 2008, 11:38:16 AM »
Quote
Additionally we have MKH 800 Twins in production and SEC should be receiving them in the next week or so.

What are the MKH800s?

Do you think that the remote cables will work with existing shempz kwon/din/ortf bars?

Offline John Willett

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1550
  • Gender: Male
  • Bio:
    • Sound-Link ProAudio
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #32 on: April 22, 2008, 01:39:24 PM »
What are the MKH800s?

The MKH 800 is the switchable-pattern MKH microphone - superb and goes up to 50kHz (I have a pair).



The new MKH 800 TWIN is based on the MKH 800 but has the two back-to-back cardioid capsules available separately on a 5-pin XLR.

This makes the mic. extremely flexible.  You can have an infinitely variable polar-pattern.  If you record both capsules on different tracks you can alter the polar-pattern in the DAW at the editing stage.  If you have a nasty acoustic (for example) you can put filters / EQ on the rear capsule only without having to do anythin on the front capsule.  With a fig-8 as well you can do Double-MS (MSM) recording and get full 5.1 from just these three capsules.  You can delay the rear capsule, etc...........

Extremely flexible and available in Nickel as well as the Nextel (same colour as MKH 8000) version linked to above.





The TWIN was launched at NAB last week and will be launched in Europe at the AES in Amsterdam next month.

About three years ago I made some double-MS recordings using a very early TWIN prototype and an MKH 30 - they sounded amazing - so I'm glad it's now out.

Offline rokpunk

  • WOULD HIT IT
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 9262
  • Gender: Male
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #33 on: April 22, 2008, 05:00:22 PM »
nifty!
The new and improved taperssection.com....now with freedom of speech without the repercussion of -T's!



again, your showing your cluelessness.


Jah sitteth in Mount Zion
And rules all creation........

Offline bluegrass_brad

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 3581
  • Gender: Male
  • Old and in the way.
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #34 on: April 22, 2008, 07:30:00 PM »
That thing look sweet! Thanks for posting that. +T
CK1x, CK2x, CK3x > Hub Industry Cables > Naiant PFA or MK46 > 460B
CK1, CK8, CK63 > 460b

"That was back in a time when society was not quite ready for this music. Anyone remember those days? That's when punk rock was dangerous, right?" - Mike Ness

Offline CQBert

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1157
  • Gender: Male
  • Sunset in Zilker Park
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #35 on: April 23, 2008, 01:48:18 PM »
My shocks just shipped and my 5m's are now ordered...

Same wait - 2-3 weeks...

CQBert
Sennheiser MKH 8040 (Matched) > Sound Devices 702

Offline John Kelly

  • Been a while...
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 9753
  • Gender: Male
    • The Jokell
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #36 on: April 23, 2008, 10:00:03 PM »
From last Saturday:
http://www.archive.org/details/mraz2008-04-19.mkh4080st.flac24

I'll have a 16 bit up soon.
Sennheiser MKH8040st > SD 702
XBL/PSN/Steam ID: thejokell

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #37 on: April 24, 2008, 11:31:13 AM »
here is a 16 bit sample from WSP 4/20/08 MKH8040ST>v3

Last Straw

http://www.sendspace.com/file/vm05i0

Offline CQBert

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1157
  • Gender: Male
  • Sunset in Zilker Park
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #38 on: April 25, 2008, 10:24:33 PM »
My shock mounts just arrived...  very nice... small and simple.  Can't wait to use them..

CQBert
Sennheiser MKH 8040 (Matched) > Sound Devices 702

Offline Crumbo

  • Trade Count: (13)
  • Taperssection Member
  • ***
  • Posts: 572
  • Gender: Male
  • I'm a llama!
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #39 on: April 28, 2008, 12:35:09 PM »
got my mini clips last week

tried to fit them on my Schoeps CCM4s and the clips are too big

so, I'm guessing that the mics with the remote cables won't work with the schoeps kwon bars

I'm wondering if they will work with the neumann kwon bars

:)
Mics: AKG ck63
Cables: nBob actives
Preamp: nbox platinum II
Recorders:  Sony PCM-M10, Edirol R-05

Offline jkbyram

  • Taperssection Underachiever
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4552
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #40 on: April 28, 2008, 01:08:39 PM »
man, after seeing a set of these last weekend, it looks like actives are not needed.  some slim wire stubby xlr's seem like that would be sweet.  these mic bodies are freaking tiny!



« Last Edit: April 28, 2008, 01:10:33 PM by jkbyram »

Offline John Kelly

  • Been a while...
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 9753
  • Gender: Male
    • The Jokell
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #41 on: April 28, 2008, 01:09:31 PM »
got my mini clips last week

tried to fit them on my Schoeps CCM4s and the clips are too big

so, I'm guessing that the mics with the remote cables won't work with the schoeps kwon bars

I'm wondering if they will work with the neumann kwon bars

:)

I've worked it out with Robert to send him my mics and cables as soon as they're in.  He's going to test them with his current bars and see what he would need to do to make new ones.  I'll let you guys know as soon as he tells me.

man, after seeing a set of these last weekend, it looks like actives are not needed.  some slim wire stubby xlr's seem like that would be sweet.  these mic bodies are freaking tiny!

True, but I like the idea of the kwon bar in a shure donut.  VERY low profile. 
Sennheiser MKH8040st > SD 702
XBL/PSN/Steam ID: thejokell

Offline Crumbo

  • Trade Count: (13)
  • Taperssection Member
  • ***
  • Posts: 572
  • Gender: Male
  • I'm a llama!
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #42 on: April 28, 2008, 01:11:39 PM »
got my mini clips last week

tried to fit them on my Schoeps CCM4s and the clips are too big

so, I'm guessing that the mics with the remote cables won't work with the schoeps kwon bars

I'm wondering if they will work with the neumann kwon bars

:)

I've worked it out with Robert to send him my mics and cables as soon as they're in.  He's going to test them with his current bars and see what he would need to do to make new ones.  I'll let you guys know as soon as he tells me.

man, after seeing a set of these last weekend, it looks like actives are not needed.  some slim wire stubby xlr's seem like that would be sweet.  these mic bodies are freaking tiny!

True, but I like the idea of the kwon bar in a shure donut.  VERY low profile. 

awesome, thanks John :)

and I agree, kwon bar, shure donut, low profile and very easy to setup and breakdown
Mics: AKG ck63
Cables: nBob actives
Preamp: nbox platinum II
Recorders:  Sony PCM-M10, Edirol R-05

Offline jkbyram

  • Taperssection Underachiever
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4552
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #43 on: April 28, 2008, 01:12:42 PM »
here is a pic from friday. louie had them on top with my 460's under it.  they look tiny with my akg's under them





there are some more pics with them setup in the rig picture forum here  http://taperssection.com/index.php/topic,102936.0.html


i am interested in hearing them now after seeing them.  Louie, seed that stuff
« Last Edit: April 28, 2008, 01:16:00 PM by jkbyram »

Offline grider

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 4570
  • Gender: Male
  • always give more than you take
Re: Sennheiser Active Setup - MKH 8000 Part II
« Reply #44 on: April 28, 2008, 04:32:00 PM »
those new Senns are sexy!!!

 

RSS | Mobile
Page created in 0.089 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF