Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Apogge 12 pin  (Read 1973 times)

0 Members and 1 Guest are viewing this topic.

Offline dan434

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • I'm a llama!
Apogge 12 pin
« on: February 20, 2004, 12:21:28 PM »
I have been having some issues with my 12-pin of late for my ad1k. The unit powers on just fine & I can get a signal via aes/ebu cable but I cannot get one from the coax/rca coming out of the 12-pin. Could this short out and need to be re-wired or is my cable just shot all together?? Any input would be great, thanks!
Logged

cpclark

  • Guest
  • Trade Count: (0)
Re:Apogge 12 pin
« Reply #1 on: February 20, 2004, 05:04:54 PM »
i have an extra one that i dont use anymore that went with my ad500e if you want that for a couple of bucks
Logged

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re:Apogge 12 pin
« Reply #2 on: February 20, 2004, 05:22:33 PM »
If you go to the Apogee site, they have a pin-out drawing for that connector.
If you have a multi-tester it would be easy to figure out if the problem is in the cabling by checking continuity.
Logged
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Apogge 12 pin
« Reply #3 on: February 20, 2004, 06:03:57 PM »
I can sell you one of mine if you want it, since no one will buy my ad500...
Logged
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline THE NIZ BIAAAAACH!

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 760
  • Gender: Male
  • Mr T don't partake in no sombrero activities!
Re:Apogge 12 pin
« Reply #4 on: February 21, 2004, 01:11:40 AM »
What calico said you can always re wire your 15pin the important part is that you have the actuall15 pin in tact.
Logged
mk21+mk4>kc5>cmc6>portico 5012>722
24\96 in your ass bitches!

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Apogge 12 pin
« Reply #5 on: February 21, 2004, 02:21:26 AM »
you can get the 15-pin DSUB connectors at the shack for about 3 bucks FWIW
Logged
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Jason B

  • Guest
  • Trade Count: (0)
Re:Apogge 12 pin
« Reply #6 on: February 21, 2004, 11:57:12 AM »
Hey, I can make these really easily if anyone needs one.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.088 seconds with 35 queries.
© 2002-2024 Taperssection.com
Powered by SMF