Topic: Schoeps Lateral Pickup(V) Users - Read

[Kwonfidelity]

As seen in this thread...
http://www.taperssection.com/yabbse/index.php?board=3;action=display;threadid=13535

If possible, I need a tally of how many are interested in a bar of this type that will hold your caps upright.  If you don't own, but have friends that do let me know on their behalf.  I have a feeling that this will be a short/limited run so I want to make sure I make enough for everyone...

1-2-3...go!

[dmonterisi]

upright at 70 degrees?  

sorry, i couldn't resist.

[Nick Culbreth]

i know this isn't related but i'd be all over a din bar for my skm140s, any plans on making one?

[KC5]

robert,
count me in on one of those upright thingies for my 4v's.

got the dats today.  thanx for spinning those.

bill

[Tim]

i know this isn't related but i'd be all over a din bar for my skm140s, any plans on making one?

todd r has put one together himself, it's a bit ghetto but it will work for now while we all await the kwon bar. he's out of town for the week but shoot him a line about how he did it...

[Kwonfidelity]

i know this isn't related but i'd be all over a din bar for my skm140s, any plans on making one?

We're on the homestretch for the Neumann bar...knock on wood.  Final protos should be here shortly...

[Mic D]

i know this isn't related but i'd be all over a din bar for my skm140s, any plans on making one?

We're on the homestretch for the Neumann bar...knock on wood.  Final protos should be here shortly...

What about DIN bars for 4022's?

[plucks]

are you talking about a true ORTF bar for the 4v's?
DIN for 4022s would be great too!

[murph]

count me in!!

[Kwonfidelity]

are you talking about a true ORTF bar for the 4v's?
DIN for 4022s would be great too!

Well the design I have now has two slots, one at 17cm, another at 20cm.  So you can run a DIN, DINA, or an ORTF with the same bar.  IT'll be notched to let you know how to turn your cap to be at 90 and 110.  I may even put one in between for 100, but you can probably just adjust the dot to the middle...

I also need the physical mic to be able to complete the 4022 bar...I can send you schoeps gear to run in place until the design is done  

[F.O.Bean]

+T nice werk kwon

[Mcrtheiss]

If it's not too late, I would definately be interested in a bar like this.  I've been running my v's on a din bar I picked up from Cascade Media.  For those of you that are geometrically challenged, a din bar run in either direction still gives you 90 degrees, but a bar that would give me 110, especially upright, would be great.  I've always thought about making a 70 degree bar, but am far too lazy.

[plucks]

thanks for the geometric details Mike!

[Tim]

I also need the physical mic to be able to complete the 4022 bar...I can send you schoeps gear to run in place until the design is done  

careful, they probably won't want to trade back  

[Kwonfidelity]

I also need the physical mic to be able to complete the 4022 bar...I can send you schoeps gear to run in place until the design is done  

careful, they probably won't want to trade back  

No worries.   My mics are pretty loyal so they'll fight to come back.  Where else would you want to be if you were Schoeps (aside from GmbH)?  


I have a 70deg bar, never made any for production.  This was aimed more for hypers back in the section.  For fear that people were going to use this for the Vs I never made more than for my personal use.  Why run something half-ass when you could have the real thing, caps upright?