Topic: Shock mount for under your T-bar...

[waltmon]

Is there a shock mount that that you could put on top of your mic stand that would basically be "under" your Vark bar or whatever?  My thoughts are to use the stock Neumann mic clips on the T-bar and basically shock mount the whole t-bar.  The 150's are so small almost every shock mount swallows them.  I often run with out shocks because it's a lot lower profile etc...especially from seats in theaters. Less bitchin from people behind me etc.  I had something way back I think it was an AT brand...it was chrome...want something lower profile (black, grey etc)

Thanks.

[jbosco]

Is there a shock mount that that you could put on top of your mic stand that would basically be "under" your Vark bar or whatever?  My thoughts are to use the stock Neumann mic clips on the T-bar and basically shock mount the whole t-bar.  The 150's are so small almost every shock mount swallows them.  I often run with out shocks because it's a lot lower profile etc...especially from seats in theaters. Less bitchin from people behind me etc.  I had something way back I think it was an AT brand...it was chrome...want something lower profile (black, grey etc)

Thanks.

Something like this:
http://taperssection.com/index.php?topic=172064.0
with this:
http://www.bhphotovideo.com/c/product/68622-REG/Shure_A53M_A53M_Isolation_and_Swivel.html

[waltmon]

Thanks...I was actually look more for something that screw mounts on top of the stand that would screw into the bottom of the Vark.

[jbosco]

Thanks...I was actually look more for something that screw mounts on top of the stand that would screw into the bottom of the Vark.

Something like this?
http://www.bhphotovideo.com/c/product/273139-REG/Neumann_Z_26_MT_Z_26_mt_Inline.html

[waltmon]

There you go!!! Nice. A little spend but love the size!!!

[John Willett]

Is there a shock mount that that you could put on top of your mic stand that would basically be "under" your Vark bar or whatever? 

Yes - the Rycote Portable Recorder Suspension will do this perfectly.



There is also an HD version for heavier rigs.



Although designed for a portable recorder, it's also perfect for sitting under a stereo bar to shockmount a pair of microphones.

[waltmon]

It looks like my followinbob 12" bar will mount up perfectly on that...that'll easily support links and a pair of 150's!

Thanks!

[F.O.Bean]

It looks like my followinbob 12" bar will mount up perfectly on that...that'll easily support links and a pair of 150's!

Thanks!

Walt, Id love to see some pics if you end up getting that This month I think I can afford to FINALLY buy [2] INV 6's

[voltronic]

It looks like my followinbob 12" bar will mount up perfectly on that...that'll easily support links and a pair of 150's!

Thanks!

Walt, Id love to see some pics if you end up getting that This month I think I can afford to FINALLY buy [2] INV 6's

Seen you post a few times about saving up for the INV 6.  Here's a way to get a pair of INV 6's for about half price if you don't mind some DIY.
http://taperssection.com/index.php?topic=171552.msg2132415#msg2132415

[waltmon]

Shock mount arrives manyana   

[DigiGal]

This is one method I posted in another thread some time ago, the clamp is not necessary.

[2manyrocks]

Nice clear photo.  Were the mics set up to record something outside or was this just to make the photo?  With them being so far from the center of the stand, is this tippy?

[DigiGal]

Nice clear photo.  Were the mics set up to record something outside or was this just to make the photo?  With them being so far from the center of the stand, is this tippy?

It was a quick photo demonstrating; the clamp, shock mount, AKG CK91's using stock OEM capsule remote cables/mounts in ORTF configuration using a small Vark bar. 

Not tippy, it's a 13 foot Impact stand with a wide footprint, I typically anchor the stand with tent stakes outdoors whether using the clamp or not for added stability.  The Rycote INV shock pictured works with this setup without a clamp which is the way I normally run it but I don't believe I posted a picture without the clamp.  The shock pictured is one of Rycote's INV-HG's but this works with their INV 7's too, just depends how heavy your mic configuration is.

[2manyrocks]

At first, I thought there was a shure vertical mount, but it is just the top of the mic stand.  What are the advantages of this setup over a mounting shock mounts to a shure vertical bar?  Do you just leave your mics in ortf on the vark bar? 

[connloyalist]

Something like this?
http://www.bhphotovideo.com/c/product/273139-REG/Neumann_Z_26_MT_Z_26_mt_Inline.html

Would that Neumann Z26mt be strong enough to hold a large-ish bar with multiple microphones?

And on John's Rycote suggestion, would a 1/4" to 3/8" adapter work, so you can attach a standard female 3/8" thread? I am assuming there are such things?

Regards, Christine