Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: My JB3 is dropping single samples.....Should Continuous be set to "ON" or "OFF"?  (Read 3926 times)

0 Members and 1 Guest are viewing this topic.

Offline bhadella

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1851
  • Gender: Male
  • Toiling away the day...
    • http://db.etree.org/bhadella1
My JB3 is dropping single samples.....Should Continuous be set to "ON" or "OFF"?
« on: April 14, 2004, 07:34:47 PM »
I'm running the 1.40.06 and am having issues w/ dropping samples from my UA-5......I've used the recording FAQ from the NJB3Tapers forum w/o any success.   I think it might have to due w/ the settings.   I've been setting it to Continuous "ON" in the recording settings.  Should the Continuous be set to off?  Does this make a difference?  Any other ideas?  The FAQ doesn't mention Continuous at all.....

Thanks

Brian
« Last Edit: April 14, 2004, 07:36:39 PM by bhadella »
Logged
"Your ideas are intriguing to me and I wish to subscribe to your newsletter. "

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #1 on: April 14, 2004, 08:23:52 PM »
try emptying your HD and defragging... mine gets buggy when it gets over half full.
Logged
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #2 on: April 14, 2004, 10:00:31 PM »
i doubt the continuous would have anything to do w/ it, do what lee said
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Swampy

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 12020
  • Gender: Male
  • You Worthless Swampy Fool
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #3 on: April 14, 2004, 10:03:55 PM »
BTW, in case you didnt know, continuous just makes it automaticly start a new file after 3 hours.
Logged

Offline John R

  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 10100
  • Gender: Male
    • www.tapers.org
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #4 on: May 08, 2004, 08:31:03 AM »
i don't think continuous would have anything to do with it.  movement of optical cable might.

jr
Logged
we all live downstream.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #5 on: May 08, 2004, 08:45:12 AM »
Quote from: John R on May 08, 2004, 08:31:03 AM
i don't think continuous would have anything to do with it.  movement of optical cable might.

jr

john, awile back when i did my initial jb3 and batt tests, i could pull my optical cable almost all the way out and it wouldnt be audibela nd was still getting a signal, however, if the siganl got knocked off 'center', it might happen like that
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline utahtaper

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 482
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #6 on: May 08, 2004, 01:35:41 PM »
Can you defrag the JB3 hard drive? I just barely got one and I'm learning. How do you do it?
Logged
Recording:
SKM 140's>LC3>ACM660

Playback:
Tascam DA30MKII DAT player
Jolida Tube CD player

Sota Saphire w/grado TLZ> Melos 333> Melos 400 monoblocks> Legacy Focus

Mcintosh MR71>c22>MC60 monoblocks

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #7 on: May 08, 2004, 03:15:30 PM »
Quote from: utahtaper on May 08, 2004, 01:35:41 PM
Can you defrag the JB3 hard drive? I just barely got one and I'm learning. How do you do it?


well, heres the deal utah, if you do a disc cleanup, i dont think anything is really gained, and if you have personal settings, they get VANISHED from this cleanup, however, if you just reformat the drive(ala 'format'), you keep your persoanl settings, and you also have a clean HD drive to write to, so i would personally 'format' the drive rather than do a disc cleanup on it, but YMMV

the ofrmat also wipes away your persoanl screen, but who cares, it keeps your HD clean/phresh!!!

phuck the disc cleanup, do a disc format ;)then reboot, after the format is done
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline steve-o

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 332
  • Gender: Male
  • I let the melody shine, let it cleanse my mind...
    • SK6
Re:My JB3 is dropping single samples.....Should Continuous be set to "ON" or
« Reply #8 on: May 09, 2004, 01:09:40 AM »
It's a great piece and I'm learning the tricks and such.  Glad we're all learning from each other.   ;)

Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.069 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF