Become a Site Supporter and Never see Ads again!

Author Topic: My SRS 3D printed microphone bars  (Read 11727 times)

0 Members and 1 Guest are viewing this topic.

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5992
  • Gender: Male
  • Maplewood, MN
Re: My SRS 3D printed microphone bars
« Reply #15 on: September 05, 2017, 11:02:47 AM »
^
Thanks Noah!  Looking forward to listening to these.

David
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

jnorman34

  • Guest
  • Trade Count: (0)
Re: My SRS 3D printed microphone bars
« Reply #16 on: September 15, 2017, 07:00:45 PM »
I have a shure a53m shock mount for my Schoeps cmc64s ORTF SRS bar, but it sags and I don't really like it.  What are other good options for attaching the shapeway bars to mic stands?

Offline voltronic

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 4104
Re: My SRS 3D printed microphone bars
« Reply #17 on: September 15, 2017, 07:07:39 PM »
I have a shure a53m shock mount for my Schoeps cmc64s ORTF SRS bar, but it sags and I don't really like it.  What are other good options for attaching the shapeway bars to mic stands?

Rycote INV mounts.  Here's my typical Line Audio setup.
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Acoustic Recording Techniques
Team Classical
Team Line Audio
Team DPA

jnorman34

  • Guest
  • Trade Count: (0)
Re: My SRS 3D printed microphone bars
« Reply #18 on: September 15, 2017, 07:36:10 PM »
Vielen dank, volt

Offline zeus163

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 232
Re: My SRS 3D printed microphone bars
« Reply #19 on: December 14, 2017, 03:19:36 PM »
I saw a couple of different Kangol mounts on Scott's Shapeway's store. But I'm a bit confused. They are for MK41V and point backwards. At least, that's what it looks like to me. I have MK4's, but would love to try a mounted set up like Scott has. I'll probably have to contact him, but was wondering if anyone else had any experience with the Kangol mounts and MK4's. Thanks!
Kangol wearing fool...

Offline 2manyrocks

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1664
Re: My SRS 3D printed microphone bars
« Reply #20 on: December 14, 2017, 04:05:57 PM »
I could use some recommendations, please, about which Rycote mount to pair with a SRS ORTF mount for full body schoeps.  https://www.shapeways.com/product/JM6H5M98P/hybrid-schoeps-cmc622?optionId=56179322&li=marketplace

This one?  https://www.bhphotovideo.com/c/product/880280-REG/Rycote_041118_INV_8_Microphone_Suspension.html?sts=pi

Offline DCiora

  • Trade Count: (5)
  • Taperssection Newbie
  • *
  • Posts: 15
Re: My SRS 3D printed microphone bars
« Reply #21 on: December 14, 2017, 04:11:49 PM »
Yes please keep it coming. If you have any pics of your set up I’m happy to share with others. I just turned Laura Hartmann onto this site and she is now as fascinated with this topic as I’ve become. Thank you all. Great info!!

Offline EmRR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 779
    • ElectroMagnetic Radiation Recorders
Re: My SRS 3D printed microphone bars
« Reply #22 on: December 14, 2017, 05:00:50 PM »
I could use some recommendations, please, about which Rycote mount to pair with a SRS ORTF mount for full body schoeps.  https://www.shapeways.com/product/JM6H5M98P/hybrid-schoeps-cmc622?optionId=56179322&li=marketplace

This one?  https://www.bhphotovideo.com/c/product/880280-REG/Rycote_041118_INV_8_Microphone_Suspension.html?sts=pi

Yes, that's the more solid mount in the right dimensions.  Here's a quick snap of another SRS bar in that mount.  Really no sag or play to speak of. 


Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN
Recorders: Zoom F8n, Sony MZ-R50

Offline costanza

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 5
Re: My SRS 3D printed microphone bars
« Reply #23 on: December 14, 2017, 05:36:50 PM »
Yes please keep it coming. If you have any pics of your set up I’m happy to share with others. I just turned Laura Hartmann onto this site and she is now as fascinated with this topic as I’ve become. Thank you all. Great info!!

Hey tapers, the internet is watching....  coming to a town near you.  Don't speak with your mouth open..

Here is some public information on DCiora via a simple Google search.
https://www.linkedin.com/in/dan-ciora-74ba7816
http://www.sound-image.com/catalina-bar-grill/
« Last Edit: December 14, 2017, 05:38:55 PM by costanza »

Offline costanza

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 5
Re: My SRS 3D printed microphone bars
« Reply #24 on: December 14, 2017, 05:38:21 PM »
For those of you that need a reminder..  this is the internet and there are people that are listening, watching, and reading what you post.


This quote was pulled from a "Team Boards" thread:

Anyone doing Chick Corea Electric Band at Catalina's this month?  Im planning on going to one or two shows, not sure.  Ive  >:D there before, not too hard just have to get a real table.

Did either you or Scooter123 record this from the audience? What table do you guys like?

Offline EmRR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 779
    • ElectroMagnetic Radiation Recorders
Re: My SRS 3D printed microphone bars
« Reply #25 on: December 14, 2017, 06:03:46 PM »
Yup.....but.....these mounts in this thread are not exactly stealth by any stretch. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN
Recorders: Zoom F8n, Sony MZ-R50

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: My SRS 3D printed microphone bars
« Reply #26 on: December 14, 2017, 06:21:28 PM »
Yes please keep it coming. If you have any pics of your set up I’m happy to share with others. I just turned Laura Hartmann onto this site and she is now as fascinated with this topic as I’ve become. Thank you all. Great info!!

Here's a picture of the rig I use at your venue!
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline 2manyrocks

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1664
Re: My SRS 3D printed microphone bars
« Reply #27 on: December 15, 2017, 08:38:05 AM »
I thought  >:D was supposed to stay  >:D?

Offline zeus163

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 232
Re: My SRS 3D printed microphone bars
« Reply #28 on: December 15, 2017, 08:52:21 AM »
Yeah, sorry about that. I just remember seeing the mention of the Kangol on the first page and wanted to ask after looking at the shapeways site. I'll just ask him directly.  >:D on.
Kangol wearing fool...

Offline 2manyrocks

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1664
Re: My SRS 3D printed microphone bars
« Reply #29 on: December 15, 2017, 10:03:51 AM »
Sorry for the misunderstanding.  I was actually referring to Noah's picture of his "rig." 

 

RSS | Mobile
Page created in 0.066 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF