Taperssection.com
Gear / Technical Help => Cables => Topic started by: pyiteac on July 10, 2008, 02:32:05 AM
-
I'm pretty sure thats going to be a custom cable. I got a tekkeon 3450 battery to power my V2 and MR-1. I got a USB>PSP cable to power the MR-1 but I need a cable built for the 12v out to the V2. Anyone want to take a stab at making this for me? ;D
-
If you want I can make this for you - I have the parts - all you need to do is send me the battery cable - I'll do it for free.
-RC
-
I just ordered a couple of cables from Tekkeon, so don't worry about sending me yours. I will call Grace about the pin out on the V2 to make sure it's pin 1 Ground pin 4 Hot.
-RC
-
I just ordered a couple of cables from Tekkeon, so don't worry about sending me yours. I will call Grace about the pin out on the V2 to make sure it's pin 1 Ground pin 4 Hot.
-RC
Thanks brother!
-
Got it today and It works like a charm!! 8)
Thank you!!
-
No problem - Remember to set the voltage before you plug in the XLR 4pin into the V2 (you will need to plug in the cable into the Tekkeon to set the voltage)