Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: chris_jones on July 26, 2005, 06:12:26 PM
-
I've been told DC jack is 2.1 x 5.5 (same as mini-me), but 4 different 2.1mm jacks don't fit the unit. odd.
has anyone run this on DC yet? if so, what dimensions are your connectors? I feel like I coulud force it, but it's not going. Don't want to break it, but want to use the gear. almost looks like the center positive pin is too fat.
-
nevermind, apparently it's 2.5 x 5.5...
-
so what does this little box sound like? clean, colored, warm, round, what?
still haven't heard it but it seems very intriguing...
-
so what does this little box sound like? clean, colored, warm, round, what?
still haven't heard it but it seems very intriguing...
Talk to Scott Brown...
-
I didn't want to badger him with PM's :)
-
i love it. very clean. very transparent. very detailed.
it's a small companybased out of small shop in NYC. but they make some sweet products. a lot of studio guys are choosing mytek gear over the "big boys" like apogee, lavry, etc. and this is over things like the trak2 and psx100, not the minime...
-
What is everyone running, the Stereo 96 or the Stereo 192? Any difference between the two (besides sample rates)?
-
http://mytekdigital.com/products/stereo192adc.htm
The main differences between Stereo192ADC and Stereo96ADC are:
- up to 192k operation (for playback at 192k check Stereo96DAC or 8X192 ADDA)
- ability to work on Battery Power
- ultra hi-end audiophile grade front end featuring large solid state capacitors (instead of electrolytics)
- Trimpots/knob switchable on front panel
- No 16/20 bit output (only 24)
-
like krebsy said, 192 is the only dc powered one
it lasts over 3 hours on the lithium from walmart.
-
Anyone run an M148 in front of one?
-
david seymour is with mytek now, i would talk with him, nice young guy. ;D
David Seymour
Mytek Digital
330-354-1576
www.mytekdigital.com
-
Anyone run an M148 in front of one?
i might be soon.
;)
-
Anyone run an M148 in front of one?
i might be soon.
;)
Jeeeeeeezus...
;)
-
Anyone run an M148 in front of one?
i might be soon.
;)
Jeeeeeeezus...
;)
hater!
:)
A couple of bands here asked me to tape em regularly, and i wanna do right by em, you know..
8)
-
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
-
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
LMAO! :D ;D
Funny Guy. +T in 12.
-
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
LMAO! :D ;D
Funny Guy. +T in 12.
You know I love ya...
;)
-
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
LMAO! :D ;D
Funny Guy. +T in 12.
You know I love ya...
;)
:)
you need to save up some dough and get some more schoeps :D
-
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
Aah, he's just overcompensating for not having a Schoeps/Lemosax rig, right Nick? ;D >:D That's a pretty exclusive team.
- Jason
-
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
Aah, he's just overcompensating for not having a Schoeps/Lemosax rig, right Nick? ;D >:D That's a pretty exclusive team.
- Jason
actually...i was considering one to throw in front of the dpas.i get em damn cheap...
-
big ray, why even bother with the 722 if you are going to wind up running a preamp and a adc in front of it? $2400 for a recorder? seems like overkill to me, you could get a r4 or something for quite a bit less and run 4 mics if size isn't an issue. use that extra scratch to buy more shit ;)
I was talking with my tounge in my cheek. ;)
I think I have a perfect setup, the only thing I would possibly think about is 4 channel mixer to run my mics into it.
-
big ray, why even bother with the 722 if you are going to wind up running a preamp and a adc in front of it? $2400 for a recorder? seems like overkill to me, you could get a r4 or something for quite a bit less and run 4 mics if size isn't an issue. use that extra scratch to buy more shit ;)
I was talking with my tounge in my cheek. ;)
I think I have a perfect setup, the only thing I would possibly think about is 4 channel mixer to run my mics into it.
Ray, if it were perfect you'd have some Neumanns in front. ;D
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
-
Ray, if it were perfect you'd have some Neumanns in front. ;D
he wanted the true Neumann sound so he got the Gefells :P
-
big ray, why even bother with the 722 if you are going to wind up running a preamp and a adc in front of it? $2400 for a recorder? seems like overkill to me, you could get a r4 or something for quite a bit less and run 4 mics if size isn't an issue. use that extra scratch to buy more shit ;)
I was talking with my tounge in my cheek. ;)
I think I have a perfect setup, the only thing I would possibly think about is 4 channel mixer to run my mics into it.
Ray, if it were perfect you'd have some Neumanns in front. ;D
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
ill be on the team as soon as get some u89s. ;)
-
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
Hey! I started that thread....
-
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
Hey! I started that thread....
you have neumanns too Nick?
-
He did until he sold them to me!! :D They are still in good hands. In fact, they recently gained a new friend.
-
david seymour is with mytek now, i would talk with him, nice young guy. ;D
David Seymour
Mytek Digital
330-354-1576
www.mytekdigital.com
Thanks for the props! I really hope that I can get to know you all better. I do mostly studio type recording but recording live shows is something that I could really learn from and get into. Thanks again!
-
Ray, if it were perfect you'd have some Neumanns in front. ;D
he wanted the true Neumann sound so he got the Gefells :P
+T :bigsmile: